Home
>
products
>
YOKOGAWA DCS
>
|
| Place of Origin | USA |
| Brand Name | Yokogawa DCS |
| Certification | CO.CQ |
| Model Number | AAI543-H00 S1 |
Yokogawa DCS AAI543-H00 S1 Current/Voltage Input Modules Non-Isolated effective service
Product Description:
When this module is used in the ambient temperature of 60 to 70 ºC by being installed in a node unit that conforms to the temperature environment, the allowable load resistance is 200 to 750 Ω. *4: This voltage is generated between the connecting terminals for 2-wire transmitters for this module. When calculating the minimum operating voltage for transmitters, consider to allow margins for voltage drop in external wiring. *5: A Zener barrier is not allowed to be connected with this module for current output. Use an isolation barrier when the module is used in intrinsically safe application. *6: A Zener barrier is not allowed to be connected with this module for current input. Use an isolation barrier when the module is used in intrinsically safe application. And this module can be used only with the following.
Related Product Recommendation:
| 0950-3017 | PW702 | MRI-234*B | KS1*B |
| AAI141-S00 | AIP502 | NFCP100-S00 S2 | AIP512 |
| AAI143-H00 S1 | AMM12T | NP53*A | AMN11 |
| AAI543-H00 S1 -- | AMM12C | NP53*C | RB401 |
| ADV151-P00 S2 | AMM42T | PW401 | VF702 |
| ADV151-P00 S2 | CP345 | PW482-10 S2 | SR1220E2 |
| ADV151-P00 S2 ATD5A-00 | MRI-234*B | PW482-S01 | 0950-3017 |
| ADV551-P00 S2 | NFCP100-S00 | PW702 | AIP502 |
| ADV551-P00 S2 | PW401 | RB401 | AMM12T |
| AFV10D S2 | PW402 | S9129FA | AMM12C |
| AIP502 | PW482-10 | SB401-10 S1 | AMM42T |
| AIP512 | TE16*B | SR1220E2 | CP345 |
| ALR121-S00 S1 | KS1*B | SR1B-045N-1KC | MRI-234*B |
| AMM12C | AIP512 | TE16*B | NFCP100-S00 |
| AMM12T | AMN11 | BS204 | PW401 |
| AMN11 | RB401 | BS205 | PW402 |
| ANB10D-S1 | VF702 | BS206 | PW482-10 |
| ATA4D-00 S2 | SR1220E2 | BS207 | TE16*B |
| ATA4S-00 S2 | 0950-3017 | CM202 | AAI141-S00 |
| CP345 | AIP502 | CNT204 | F3RP45-2P/L1 |
| CP451-10 S2 | AMM12T | DI232 | NFCP100-S00 S2 CPU |
| EC401-10 S2 | AMM12C | DIO216 | PW482-S01 |
| F3RP45-2P/L1 | AMM42T | DIO280 | SR1B-045N-1KC |
| KS1*B | CP345 | DIO32-C | ALR121-S50 S1 |
| MRI-234*B | MRI-234*B | EM203 | AAI143-H03 |
Product's Character:
When a switch over from control to stand-by module takes place in the dual-redundant configuration, the maximum period of time when the field output falls below 4 mA is 100 ms for AAI543-5/-E (standard switch-over response) and 2 ms for AAI543-6/-F (fast switch-over response). In case of connecting fast response type field devices, use AAI543- 6/-F (fast switch-over response) in the dual-redundant configuration. *4: When the dedicated cable is used, the withstanding voltage is 500 V AC (between the input signal and the system). When the ML connector cable is used, the withstanding voltage depends on the electrical specifications of the cable. *5: When this module is installed in a ER bus node unit with HART function, the EB401 firmware must be rev. 2 or later.
The use of the product:
1. Q: Do you provide warranty for the goods?
A: Yes, we provide warranty for all the goods from us.
2. Q: Could Moore provide technology support?
A: We're in this field more than 12 years. If there's any problem, please contact with us,we'll provide suggestion from our engineer to help you solve problem.
3. Q: Does Moore keeps goods in stock or only trading?
A: We have large warehouse for goods. Keep lots of goods in warehouse, so could promise fast delivery.
Email :sales@mooreplc.com
Q Q: 2851195450
Skype: miyazheng520
Mobile:86-18020776792 ( what's app )
Contact Us at Any Time
