ABB Module DCP10 ABB DCP10 DIGITAL CONTROLLER Ship to Worldwide

ABB Module DCP10 ABB DCP10 DIGITAL CONTROLLER Ship to Worldwide

Product Description:

All of the AC31 devices, no matter whether they are master or slave devices, are connected with twistedpair bus line as follows:One core of the bus line is looped through via the BUS1 terminals of all devices to be connected to the CS31 system bus. The other core of the bus line is looped through via
the BUS2 terminals of all devices to be connected to the CS31 system bus. If the basic unit 07 KT 94 is located at the beginning or at the end of the bus line, the bus terminating resistor (120 W) has to be connected additionally between the BUS1 and BUS2 terminals.
The shield of the twisted-pair bus line is looped through via the SHIELD terminals of all the devices to be connected to the CS31 system bus. The handling of the CS31 system bus is described in
The terminals 40 and 41 (L+) as well as 42 and 43 (M) are detail in volume 2, System data

Related Product Recommendation:

Product's Character:

Features of the digital inputs/outputs:The 8 digital inputs/outputs are arranged in one group.The group as a whole is electrically isolated from the rest of the device.The inputs/outputs can be used individually as input,output or re-readable output. If the terminals are used as digital inputs, the input signal delay can be configured to 7 ms (default) or to 1 ms. The configuration is performed by setting certain
bits in the system constant KW 85,01 as follows: If the terminals are used as digital outputs, the output
signals "1" are individually monitored by the re-readable input. If the output status is wrong, an overall error message is generated for the involved output group.The error is displayed by the red LED Ovl. and by errorflags of the PLC then. The error could have been caused by overload, shortcircuit
or missing supply voltage UP5/ZP5.The technical specifications are the same as with the
other digital inputs and outputs.

The use of the product: