ABB Module ECC 086387-001 ABB ECC 086387-001 ABB ECC RAM REG RDIMM Fast shipping

ABB Module ECC 086387-001 ABB ECC 086387-001 ABB ECC RAM REG RDIMM Fast shipping

Product Description:

The following two terminals are reserved for the counter and cannot be used for other purposes:
Terminal 2 (E62,00): Counting input Terminal 46 (A62,00): Output ”End value reached” Enabling of the counting input and of the output ”End value reached” is performed via the function block with
Operating mode 2: 1 up-counter with enable input as terminalFig. : Counter in operating mode 2
Start value The following three terminals are reserved for the counter and cannot be used for other purposes: Terminal 2 (E62,00): Counting input Terminal 3 (E62,01): Enable input Terminal 46 (A62,00): Output ”End value reached” The enable input enables the counting input as well as the output ”End value reached”. The counter is only enabled if the enabling input E 62,01 = 1 and at the function block the input EN = 1.

Related Product Recommendation:

Product's Character:

In this operating mode exist two counters which work independently of each other. The signal ”End value
reached” can only be read from the function blocks, not via terminals. The following two terminals are reserved for the counters and cannot be used for other purposes: Terminal 2 (E62,00): Counting input of counter 0 Terminal 3 (E62,01): Counting input of counter 1 The COUNTW function block is needed twice.
Note: It is not intended to change the counting direction (with U/D) while the counter is running. When U/D is changed, this forces that the counter is set to its start value. After that, the counter starts counting in the new direction.

The use of the product: