Payment & Shipping Terms:
|Manufacture Year:||2016||Control System:||ABB Module System|
|Application:||Nuclear Power Plant||Lead Time:||In Stock|
|Description:||GJR2370500R2 ABB GJR2370500R2 GJR 2370500R2||Weight:||4lbs|
ABB Module GJR2370500R2 ABB GJR2370500R2 GJR 2370500R2 Programmable Logic Controller PLC long life
In this operating mode, incremental position sensors can be used which give their counting signals on tracks A and B in a 90° phase sequence to each other. Dependent on the sequence of the signals at A and B the counter counts up or down. The module has no pulse multiplier (such as x2 or x4).
Only sensors which output 24 V signals can be used. 5 V signals must be converted into 24 V signals. A
zero track cannot be connected.The signal ”End value reached” can only be read from the function block, not via a terminal.The following two terminals are reserved for the counter and cannot be used for other purposes: Terminal 2 (E62,00): Track A of the position sensor Terminal 3 (E62,01): Track B of the position sensor In general, the technical system data listed under ”System data and system configuration” in chapter 1 of volume 2 of the Advant Controller 31 system description are valid. Additional data or data which are different from the system data are listed as follows.
Related Product Recommendation:
|07KT97||3ASU21C110 LU6278 DCU30/7||C1900/0363 C1900/0363/0360A|
|07PS62R2||3BHE022291R0101 PCD230A||CI520V1 3BSE012869R1|
|07SK90R1||3BHE023784R2530 PP D113||CI522 3BSE012790R1|
|07ZE63R302||3BHE024577R0101 PP C907 BE||CI522A 3BSE018283R1|
|DSAI145||3BSE001245R1 3BSC640008R1||CI526 3BSE006085R1|
|DSBC173 57310001-KH||3BSE003879R1||CI531 3BSE003825R1|
|DSCS140||3BSE011316R1 SDCS-PIN-52||CI532V01 3BSE003826R1|
|IDS-DTU51 57520001-EV||3HAC14550-4||CI532V02 3BSE003827R1|
|DSDP170 DSDP 170 57160001-ADF 5716075-AH||3HAC17484-8||CI532V04 3BSE003829R1|
|DSDP 160||3HAC17484-9||CI540 3BSE001077R1|
|PM860K01 3BSE018100R1||3HNM09846-1||CI590 3BHT340092R1|
|PM861AK01 3BSE018157R1||3HNP04014-1||CI615 3BHT300024R1|
|PP835A 3BSE042234R2||424K1105||CI626A 3BSE005023R1|
|CMA114 3DDE300013||6638910B1 638910B1PS0084||CI630 3BSE011000R1|
|07MK92 GJR5253300R1161||89AR30||CI854AK01 3BSE030220R1|
|07NG61R1 GJV3074311R1||A8PU05ABFW02||CI857K01 3BSE018144R1|
|07NG63R1 GJV3074313R1||AI610 3BHT300000R1||CI860 CI860K01 3BSE032444R1|
|07PS62R2 GJV3074332R2||AI625 3BHT300036R1||CM30/000S0E0/STD|
|07SK90R1 GJR5250200R0001||AI630 3BHT300011R1||CMA112 3DDE300013|
|07ZE61R302 GJV3074321R302||AI810 3BSE008516R1||CMA114 3DDE300013|
|07ZE63R302 GJV3074323R302||AI830A 3BSE040662R1||CMA121 3DDE300401|
|086363-002 OSPS2||AV31 AV 31||CMA132 3DDE300412|
In order to safe the user program in the SmartMedia Card(SMC Card), a brand new SMC Card is required or another one which has never been initialized as a user data memory. Sequence of program saving Load PLC user program into the PLC (RAM) While power is ON, insert the SMC Card
Activate monitor command "SP".The user program is now copied from the PLC's RAM to its Flash EPROM and then loaded into the SMC Card. An update of the 07 KT 94's operating system (firmware)
is not possible with the SMC Card.The high-speed counter used in the basic unit 07 KT 94
works independently of the user program and is therefore able to response quickly to external signals. It can be used in seven different and configurable operating modes. The desired operating mode is set in the system constant KW 85,02 (described later). The configured operating mode is only activated during initialization (power-on, cold start, warm start). For all operating modes, the same function block COUNTW is used.
The use of the product:
1.365 days warranty for all the goods from us.
3.Avoid unplanned downtime
1.Q: Can you provide discount ?
A: Yes, we are glad to offer you dicount if you order more than 1 piece
2. Q: Could Moore provide technology support?
A: We're in this field more than 12 years. If there's any problem, please contact with us,we'll provide suggestion from our engineer to help you solve problem.
3. Q: Does Moore keeps goods in stock or only trading?
A: We have large warehouse for goods. Keep lots of goods in warehouse, so could promise fast delivery.
Send your Inquiry details in the Below, Click "Send" Now!
Q Q: 2851195450
Mobile:86-18020776792 ( what's app )
Contact Person: miya