ABB Module INICT03A ABB INICT-03A ABB INICT 03A PROCESSOR MODULE DHL FREE

ABB Module INICT03A ABB INICT-03A ABB INICT 03A PROCESSOR MODULE DHL FREE

Product Description:

The pulses at the counter input or the evaluated signals at tracks A and B in case of connection of incremental position sensors are counted.The maximum counting frequency is 50 kHz.The counter uses the terminals 2 (E 62,00) and 3 (E 62,01) as fast inputs and, in one operating mode,also the output terminal 46 (A 62,00). In order to make all binary inputs and outputs available for other purposes
than counting, it is possible, to disable the 07 KT 94’s counting function.The counter can count upwards in all operating modes.It counts beginning at the start value (set value) up to the end value (max. from –32768 to +32767 or from 8000H to 7FFFH). After reaching +32767, the counter jumps with the next pulse to –32768. When the counter reaches the end value END, which was set in the function block, the value CF=1 is stored in the function block. Only when the counter is set again (SET), CF is reset to 0.

Related Product Recommendation:

Product's Character:

Enabling of the counting signals:The counting signals must be enabled. This is done depending on the operating mode either via a terminal or with the input EN (Enable) of the function block.Setting the counter to a start value: The counter can be set to a start value. This value must be present at the input STA (Start value) of the function block. Using the set signal (dependent on the operating mode either via a terminal or with the SET input of the function block) the value of the word variable at STA is written into the counter. Note: If the SET and EN signals are present during several processing cycles, the processor sets the counter every program end crossing anew.During the rest of the processing cycle the counter
counts pulses.

LOT 5 NEW TIMKEN 350414 NATIONAL SEAL SHAFT OIL SEAL 1X1-7/16X1/4IN D221906

LOT 1000 NEW FISHER SCIENTIFIC 21-244-3 SLIM-LINE DISPOSABLE PIPET TIPS D476259

LOT 2 NEW FEDERAL MOGUL 472843 OIL SEAL 1-3/8IN X 2-5/8IN X 3/8IN B301695

NEW MULTIVAC 11.538.9690.00 BRACKET STEEL D252781

NEW AMERICAN STANDARD P67917 L1189 REPAIR KIT D362967

NEW GOJO INDUSTRIES 1200 1-GAL DISPENSER CRANK UNIT D476007

NEW OVALSTRAPPING 1C650 IRREGULAR EXIT STRAP GUIDE D447342

LOT 3 REXROTH 3710790500 MIXED WABCO MANIFOLD VALVE 1/2IN NPT PORT 4WAY B208428

LOT 6 ASSORTED 600 WOG 1/2IN NPT BALL VALVES D373462

LOT 2 NEW CUTLER HAMMER H1237 HEATER OVERLOAD ELEMENT D385152

LOT 5 NEW DSO FLUID HANDLING CD0-078-000 PUMP DIAPHRAGM BUNA-N 4IN D390320

NEW LOT 2 MOLEX WMF-3901PRT MINI-FIT JR CONNECTOR 2 CIRCUIT PANEL MOUNT B477722

LOT 5 NEW IDEAL 44-103 WIRE MARKER BOOKLET D513746

LOT 74 NEW SPIROLOX RS-125 RETAINING RING 34X30X1MM D312140

LOT 12 NEW NA A2-70 FS 5/8IN THICKNESS 1-1/2IN INDUSTRIAL SCREW B236393

LOT 20 NEW SOLUS VALU GUIDE VG-292 4X2X3/4IN SPACER USED W/ VG-203/220 B377543

The use of the product: