ABB Module PM511V08 3BSE011180R1 ABB PM511V08 3BSE011180-R1 FILTRO OLIO High quality

ABB Module PM511V08 3BSE011180R1 ABB PM511V08 3BSE011180-R1 FILTRO OLIO High quality

Product Description:

he red LED Ovl. goes out when the overloaded output is switched on again automatically.
The acknowledgement of the error message, i.e. the resetting of the error flags, is carried out according to chapter B4.8 (Appendix), Acknowledgement of error messages in the basic unit.The outputs are safe against reverse polarity and forced supply of 24 V DC. Use of the digital output signal at the terminal 46
(A 62,00) for the high-speed counter The output A 62,00 can be assigned to the internal highspeed
counter by configuration. If the counter is used in the operating modes 1 or 2 (up-counter), the output A 62,00 is only available for the counter. If the output is to use as a normal digital output, it has to
be made sure, that the high-speed counter is not configured to the operating modes 1 or 2 (see also the chapter "High-speed counter").

Related Product Recommendation:

Product's Character:

In order to avoid measurement errors, it is absolutely necessary, to lead the cores to the Pt100 sensors in the same cable. The cores must have the same cross section. Per channel, a twisted pair is used (for the two terminals of the Pt100 sensors) plus a single core (half of a twisted pair) for the connection to AGND1. Depending on the configured operating mode, the measured value is assigned linearly as follows the return wire AGND1. In the operating mode "Pt100 in 3-wire configuration" two adjacent analog inputs belong together (e.g. EW 6,00 and EW 6,01). For configuration, both inputs must be configured to the desired operating mode, see configuration table Fig.  The constant current of the one channel flows through the Pt100 resistance sensor, the constant current of the other channel through one of the wires.
The basic unit 07 KT 94 calculates the measuring value from the two voltage drops and stores it under the odd address 

DCS800-S02-1500-06 Module Drive ABB
DCS800-S02-2000-06 Module Drive ABB
DCS800-S02-2000-07 Module Drive ABB
DD 370A GJR2237400R0001, GJR2237400R1 DD370A Diode Module ABB
DD 371a HEIE 420334 R1 DD 371a Module ABB
DDI 01 P 3711-4-0369626 DDI 01 Digital Input Module ABB
DDI 02 0369637M DDI 02 Digital Input Module ABB
DDI 03 0369643M DDI 03 Digital Input Module ABB
DDI 04 0369643M DDI 03 Digital Input Module ABB
DDO 01 P 37151-4-0369627 DDO 01 Digital Ouput Module ABB
DDO 02 P37151-4-0369642 DDO 02 Digital Ouput Module ABB
DDO 03 P37151-4-0369643 Freelance Digital Output Module ABB
DDO 04 0369644M DDO 04 Digital Output Module ABB
DFC 01 37261-4-0369529 FieldController Main Board ABB
DFE 01 P 37262-4-0369565 Ethernet Module 10Base2 ABB
DFI01 P37112-4-036-9681 Pulse Input Module ABB
DFM 11 P 37262-4-0369575 Profibus DPV1 Module ABB
DFM02 DFM 02 Serial Fieldbus Module ABB
DFP 01 P 37264-4-0369562 FieldController Power Supply Module ABB
DI-24-16 DI2416 Digital Input Module ABB
DI-24-32 FDI2432 Digital Input Module ABB

The use of the product: