Allen Bradley Modules 1336F-BRF10-AA-EN 1336F BRF10 AA EN AB 1336F BRF10 AA EN AC Drive New foreign imports
Product Description:
All drives come equipped with a fault LED. When the fault LED is illuminated it is an indication a fault condition exists. Refer to page 2-3 for the location of the fault LED. Once the fault is properly cleared the LED will return to an off state. Diagnostics As can be seen in Figure 2.3, there are two indicators
provided to display the drive’s status condition. The DC Bus Charge Indicator is a neon bulb that will be illuminated when power is applied to the drive. The Fault Indicator is an LED that will be illuminated if a drive fault condition exists. Refer to details on How To Clear a Fault, below.How To Clear a Fault Important: Resetting a fault will not correct the cause of the fault condition. Corrective action must be taken prior to resetting the fault. To clear a fault perform one of the following:Cycle power to the drive. Cycle the stop signal to the drive. Cycle the [Clear Fault] parameter.
Related Product Recommendation:
1442-PS-0812M0010A | 1785-L60L | 1771-DB |
1442-PS-0812M0010N | 1785-L80B | 1771-DXPS |
1442-PS-0815M0005A | 1785-L80C | 1771-HS3A |
1442-PS-0815M0005N | 1785-L80C15 | 1771-IAD |
1442-PS-0815M0010A | 1785-LT3 | 1771-IAN |
1442-PS-0815M0010N | 1785-LTB | 1771-IB |
1442-PS-0816E0005A | 1785-ME16 | 1771-IFEK |
1442-PS-0816E0005N | 1785-ME32 | 1771-IFM |
1442-PS-0816E0010A | 1785-PFB | 1771-IK |
1442-PS-0816E0010N | 1785-V40L | 1771-IL |
1442-PS-0820E0005A | 1785-V40V | 1771-IR |
1442-PS-0820E0005N | 1785-V80B | 1771-NC15 |
1442-PS-0820E0010A | 1786-BNC | 1771-NC6 |
1442-PS-0820E0010N | 1786-RPA | 1771-NIS |
1442-PS-0830E0005A | 1786-RPFM | 1771-NR |
1442-PS-0830E0005N | 1786-RPFRL | 1771-OBD |
1442-PS-0830E0010A | 1786-RPFRXL | 1771-OQ16 |
1442-PS-0830E0010N | 1788-CN2FF | 1771-OW16 |
1442-PS-0840E0005A | 1788-CNC | 1771-OZL |
1442-PS-0840E0005N | 1788-CNET | 1771-P4R |
1442-PS-0840E0010A | 1788-ENBT | 1771-P7 |
1442-PS-0840E0010N | 1790D-TN4V0 | 1771-SDN |
1442-PS-0850E0005A | 1785-ENET | 1772-LN2 |
1746-N2 | 1785-L20B | 1772-LS |
1746-NI04I | 1785-L20C | 1772-LW |
1746-NIO4V | 1442-PS-0512M0010A | 1747-AIC |
1746-NO4I | 1442-PS-0512M0010N | 1747-AICR |
1746-NO4V | 1442-PS-0515M0010A | 1747-ASB |
1441-DYN25-M4CH | 1442-PS-0515M0010N | 1747-BA |
1441-DYN25-MBAL | 1442-PS-0516E0010A | 1747-DCM |
1441-DYN25-MBMP | 1442-PS-0516E0010N | 1747-KE |
Product's Character:
All drives come equipped with a fault LED. When the fault LED is illuminated it is an indication a fault condition exists. Refer to page 2-3 for the location of the fault LED. Once the fault is properly cleared the LED will return to an off state. Diagnostics As can be seen in Figure 2.3, there are two indicators
provided to display the drive’s status condition. The DC Bus Charge Indicator is a neon bulb that will be illuminated when power is applied to the drive. The Fault Indicator is an LED that will be illuminated if a drive fault condition exists. Refer to details on How To Clear a Fault, below.How To Clear a Fault Important: Resetting a fault will not correct the cause of the fault condition. Corrective action must be taken prior to resetting the fault. To clear a fault perform one of the following:Cycle power to the drive. Cycle the stop signal to the drive. Cycle the [Clear Fault] parameter.
1771-P4 Power Supply Module AB
1771-P4R Power Supply AB
1771-P4S Power Supply Module AB
1771-P4S1 Power Supply AB
1771-P5 Power Supply AB
1771-P5E Power Supply AB
1771-P6R Power Supply AB
1771-P6S Power Supply AB
1771-P6S1 Power Supply AB
1771-P7 Power Supply AB
1771-PA Power Supply Module AB
1771-PS7 Power Supply Module AB
1771-PS7C Power Supply Assy. 120/220 AC AB
1771-QB Linear Positioning Module AB
1771-RTP4 TYP UMK-SE 11,25-1 902-RTP Remote Termination Panel AB 1
1771-SDN/B 1771-SDN Devicenet Scaner Module AB
1771-SIM Simulator Module AB
1771-SN Sub I/O Scanner Module AB
1771-VHSC Very High Speed Counter Module AB
1771-WA Field Wiring Arm AB
1771-WB Field Wiring Arm,12 Terminals AB
1771-WC Field Wiring Arm AB
1771-WD Field Wiring Arm,12 Terminals AB
1771-WH Field Wiring Arm, 16 I/O channels (21 terminals) AB
1771-WN Field Wiring Arm 32 Terminals AB
1772-CS Processor/Scanner Interconnect Cable AB
1772-LH Processor Interface Module AB
1772-LN2 CPU Module AB
1772-LP2 PLC-2/20 PLC-2/20 Processor Unit AB
1772-LP3 PLC-2/30 PLC-2/30 Processor Unit AB
1772-LS PLC-2/05 PLC-2/05 Processor AB
1772-LW PLC 2/17 MINI PLC 2/17 Processor AB
1772-LWP D PLC2 DNGL SL 6K Proc AB
1772-LX/C PLC 2/16 Mini PLC 2/16 Processor AB
1772-LX/D PLC 2/16 Mini PLC 2/16 Processor AB
The use of the product:
1.quality and quantity
2.transmission and distribution.
3.combustion control systems,
1.We keep more than 10 thousands Transistors in warehouse, it could cut lead time of most items.
2.We keep more than 10 thousands Transistors in warehouse, it could cut lead time of most items.
3.Customer service in 1-4 hours. If there's any question, please contact with our sales.
Our advantages:
1. Customer service in 1-4 hours. If there's any question, please contact with our sales.
2.2000+ suppliers with us, we could help you to get any components which is difficult to get.
3.Risk-free guarantee, 60 days refund. If the item you purchase from our store are not of perfected quality, simply return them to us for replacement or refund.
1.Q: Can you provide discount ?
A: Yes, we are glad to offer you dicount if you order more than 1 piece .
2.Q:Does your goods are new and original ?
A: yes ,they are new and original
3.Q:How long warranty does Moore can provide ?
A: Moore can provide 1 year warranty !
Send your Inquiry details in the Below, Click "Send" Now!
Email :sales@mooreplc.com
Q Q: 2851195450
Skype: miyazheng520
Mobile:86-18020776792 ( what's app )
Contact Us at Any Time