Allen Bradley Modules 1785-L80C 1785 L80C AB 1785L80C Processor Module

Allen Bradley Modules 1785-L80C 1785 L80C AB 1785L80C Processor w/ControlNet

Product Description:

All drives come equipped with a fault LED. When the fault LED is illuminated it is an indication a fault condition exists. Refer to page 2-3 for the location of the fault LED. Once the fault is properly cleared the LED will return to an off state. Diagnostics As can be seen in Figure 2.3, there are two indicators
provided to display the drive’s status condition. The DC Bus Charge Indicator is a neon bulb that will be illuminated when power is applied to the drive. The Fault Indicator is an LED that will be illuminated if a drive fault condition exists. Refer to details on How To Clear a Fault, below.How To Clear a Fault Important: Resetting a fault will not correct the cause of the fault condition. Corrective action must be taken prior to resetting the fault. To clear a fault perform one of the following:Cycle power to the drive. Cycle the stop signal to the drive. Cycle the [Clear Fault] parameter.

Related Product Recommendation:

Product's Character:

Bulletin 1305 drive parameter data can be programmed and displayed using PLC’s, SLC’s or other logic controllers using an optional Bulletin 1203 Communication Module. The amount of information that can be transferred between the drive and controller is determined by the DIP switch settings on theCommunication Module. Table B.1 illustrates the dip switch settings for Bulletin 1203-GD1 (Remote I/O) communication modules. Dip switch settings for other communication modules will be similar. Refer
to the appropriate communication module user manual for details.Important: 1305 drives with firmware revisions FRN1.01 and FRN1.02 are not compatible with Bulletin 1203 Communication Modules. If connected, an error message will be indicated. The red fault status and amber SCANport status LED’s on the front of the module will flash simultaneously.

1747-NP1 Wall Mount Power Supply AB
1747-OCKTX Open Controller - Communication Interface Module AB
1747-OCPCI4 Open Controller PCI Backplane AB
1747-OCVGA1 Open Controller - VGA Interface Module AB
1747-PIC PC Interface Converter AB
1747-PSD Program Storage Device AB
1747-PT1 Hand Held Terminal AB
1747-SCNR ControlNet Scanner Module AB
1747-SDN DeviceNet Scanner Module AB
1747-SN Remote I/O Scanner AB
1747-UIC USB to DH-485 Interface Converter AB
1747OC-EDEBA Open Controller - CPU Module AB
1756-A13/A 13 Slot Chassis - Series A AB
1756-A13/B 13 Slot Chassis - Series B AB
1756-A17/A 17 Slot Chassis - Series A AB
1756-A17/B 17 Slot Chassis - Series B AB
1756-BA2 Battery Assembly AB
1756-CNB/D ControlNet Bridge Module - Series D AB
1756-CNB/E ControlNet Bridge Module - Series E AB
1756-DHRIO/B DH+/RIO Bridge/Scanner Module - Series B AB
1756-DHRIO/C DH+/RIO Bridge/Scanner Module - Series C AB
1756-DHRIO/D DH+/RIO Bridge/Scanner Module - Series D AB
1756-DHRIO/E DH+/RIO Bridge/Scanner Module - Series E AB
1756-DNB/A DeviceNet Bridge/Scanner Module - Series A AB
1756-DNB/B DeviceNet Bridge/Scanner Module - Series B AB
1756-DNB/D DeviceNet Bridge/Scanner Module - Series D AB
1756-DNB/E DeviceNet Bridge/Scanner Module - Series E AB
1756-IB16/A Digital Input Module AB

ICT 4916171 PMT+PRE AMP In-Lens Detector AMAT 50409150000 SemVision cX works

VAT 26324-KA41-0001 HV Angle Valve AMAT SemVision cX used working

A to Z Electronics 50419600200 OMC PCB Chassis AMAT SemVision cX working

A to Z Electronics 50312460100 ETPS Assy AMAT SemVision cX used working

Pneutal SCP-161 10 bar Vacuum Tank AMAT Semvision cX used working

AMAT 0090-A2230 IPU Assy Industrial Computer 0090-A0970 SemVision cX used works

Thermo Electron 8815A-3SUS-SN EDX Sensor AMAT SemVision cX used working

RH Electronics 50419700200 OM Power Supply Cage OMP AMAT SemVision cX used works

CMC AM422670P000 Motion Controller Aximate/C AMAT SEMVision cX used working

Lambda 40935 Power Supply Alpha 400W AMAT SemVision cX working

Varian 9699504S011 Pump Controller & Cables Turbo-V 250 C.U. SemVision cX works

AMAT SemVision Wafer Transfer Arm Assembly AMAT SemVision cX 300mm works 800-494

MKS 41A12DGA2BA010 10 TORR-G Trip Baratron Pressure Switch 100 TORR-G used works

Brooks 6-0001-0817-SP Robot Rail LTRA 042-SBI AMAT SemVision cX working

AMAT SemVision cX SEM Tilt Motor Assembly used working

Opal ETD Board 50312575100 Circuit Board AMAT SemVision cX working

Opal DVD Board 50312540200 Circuit Board AMAT SemVision cX working

The use of the product: