DS200SSBAG1BAA DC300 GE Controller

Product Description

Product Specification

Product Details

The GE DC300 Drive Snubber Board DS200SSBAG1BAA features one

2-pin connector, 3 capacitors, and four posts for attaching cables. The

capacitors are identified as MOV1, MOV2, and MOV3. The identifiers

are printed on the board next to the capacitors. Because there are multiple

cables connected to the board that have to be disconnected and then

reconnected to the replacement board, there are several guidelines to follow

to avoid errors during the replacement process that might cause the servicer

to attach the cables to the wrong terminals.

Before you remove the defective board from the drive, examine the cables

attached to the terminals and note the IDs assigned to the terminals. Write

on a tag or sticker the ID of the connector to which each cable is attached

and attach it to the cable. There is also a 2-pin connector on the board.

However, since there is only one 2-pin connector you can disconnect it

without attaching a tag or sticker to it.

GE News

GE-led Consortium to Build Two High-Efficiency, Lower Emission HA Combined Cycle

Power Units at Dolna Odra Power Plant in Poland:

PGE’s Dolna Odra Plant will be equipped with two GE 9HA.01 gas turbines, two

steam turbines, two generators and two heat recovery steam generators to deliver

world-class efficiency and flexibility for the combined cycle power plant.

More Products

Contact Us