ABB Module NTCL01 ABB NTCL-01 ABB NTCL 01 COMMUNICATION UNIT New foreign imports

ABB Module NTCL01 ABB NTCL-01 ABB NTCL 01 COMMUNICATION UNIT New foreign imports

Product Description:

Please take also into consideration that supply voltages which are looped through are disconnected for the following devices when the plug is withdrawn. If higher currents are to be conducted without interruption possibility, the two wires for M have to be connected under the same terminal. The same applies for L  Reactions on errors of error class 3 The user can configure whether or not the user program is to be aborted automatically, if an class 3 error occurs, see chapter B7 (Appendix), System constants.The connection to the CS31 system bus is made by means of a 3-pole detachable terminal block. Please observe:All of the AC31 devices, no matter whether they are master or slave devices, are connected with twistedpair bus line as follows: One core of the bus line is looped through via the
BUS1 terminals of all devices to be connected to the CS31 system bus. The other core of the bus line is looped through via the BUS2 terminals of all devices to be connected to the CS31 system bus.

Related Product Recommendation:

Product's Character:

If the basic unit 07 KT 94 is located at the beginning orat the end of the bus line, the bus terminating resistor(120 W) has to be connected additionally between theBUS1 and BUS2 terminals.calling up the menu item of ”Enable PLC mode” in the ABB programming and test system or performing a warm startperforming a cold start or  power OFF/ON. Setting the cycle time see chapter B1 (Appendix), Processing times Addressing when remote modules are coReactions on errors of error class 3 The user can configure whether or not the user program is to be aborted automatically, if an class 3 error occurs, see chapter B7 (Appendix), System constants.Starting-up the AC31 system after power ON The user can enter a number of n remote modules in KW 00,09. The user program starts only, i.e. it handles process inputs and outputs only, if at least n remote modules have been adopted into the CS31 system bus cycle, see chapter B7 (Appendix), System constants

GJR5250000R0101 07KR91 CS31 Central Unit - 90 Series ABB
GJR5250000R0151 07KR91 CS31 Central Unit ABB
GJR5250000R0202 07KR91, 07KR91D, 07KR91B Central Processing Unit -120/230 Vac ABB
GJR5250000R0252 07 KR 91 07KR91 Central Processing Unit-24 VDC ABB
GJR5250000R0303 07KR91 Advant Controller 31 ABB
GJR5250000R0353 07KR91B 07KR91 Basic Unit ABB

GJR5250200R1 07SK90R1, GJR 525 0200 R0001 07SK90R1 Programming Cable - 5 meters ABB
GJR5250500R0101 07KT92 Central Unit - 90 Series ABB
GJR5250500R0202 07KT92, 07KT92 D, 07KT92C 07KT92 Central Processing Unit ABB
GJR5250500R0262 07KT92 07KT92 Central Processing Unit - 90 Series ABB
GJR5250500R0902 07 KT 92 07KT92 Central Processing Unit ABB
GJR5250500R5101 23KT92, RTU510 RTU510 23KT92 Unit ABB
GJR5250800R0202 07 DO 90-S Digital Output Unit ABB
GJR5250900R0202 07 DI 90-S 07DI90-S Digital Input Module ABB
GJR5251000R0101 07 KP 90 Communications Module ABB
GJR5251000R0202 07KP90 07KP90 RCOM Communication Module ABB
GJR5251000R0303 07KP90 07 KP 90 RCOM Communications Module ABB
GJR5251063P1 Module Connector ABB
GJR5251200R0202 07AI90-S Analog Input Module ABB
GJR5251300R0101 07KT93 07 KT 93 Central Processing Unit - 90 Series ABB
GJR5251300R0161 07KT93 07KT93 Central Unit - 90 Series ABB
GJR5251300R0171 07KT93,07KT93G 07KT93 Central Processing Unit ABB
GJR5251300R2171 07KT93-S 07 KT 93-S Central Processing Unit - 90 Series

The use of the product: