ABB Module NTCL01-A ABB NTCL01A ABB NTCL01 A PC Board quality and quantity

ABB Module NTCL01-A ABB NTCL01A ABB NTCL01 A PC Board quality and quantity

Product Description:

Features:The 24 digital inputs are arranged in three groups of 8 inputs each.The three groups E 62,00...E 62,07, E 62,08...E 62,15 and E 63,08...E 63,15 are electrically isolated from each
other.The inputs use 24V signals in positive logic (1 = +24 V).The signal delay of the inputs is configurable to 7 ms (default) or 1 ms. The configuration is performed by setting certain bits in the system constants KW 85,00 and KW 85,01 as follows:program is to be aborted automatically, if an class 3 error occurs, see chapter B7 (Appendix), System constants.The connection to the CS31 system bus is made by means of a 3-pole detachable terminal block. Please observe:All of the AC31 devices, no matter whether they are master or slave devices, are connected with twistedpair bus line as follows: One core of the bus line is looped through via the BUS1 terminals of all devices to be connected to the CS31 system bus. The other core of the bus line is looped through via the BUS2 terminals of all devices to be connected to the CS31 system bus.

Related Product Recommendation:

Product's Character:

If the basic unit 07 KT 94 is located at the beginning orat the end of the bus line, the bus terminating resistor(120 W) has to be connected additionally between theBUS1 and BUS2 terminals.calling up the menu item of ”Enable PLC mode” in the ABB programming and test system or performing a warm startperforming a cold start or  power OFF/ON. Setting the cycle time see chapter B1 (Appendix), Processing times Addressing when remote modules are coReactions on errors of error class 3 The user can configure whether or not the user program is to be aborted automatically, if an class 3 error occurs, see chapter B7 (Appendix), System constants.Starting-up the AC31 system after power ON The user can enter a number of n remote modules in KW 00,09. The user program starts only, i.e. it handles process inputs and outputs only, if at least n remote modules have been adopted into the CS31 system bus cycle, see chapter B7 (Appendix), System constants

GJR5251063P1 Module Connector ABB
GJR5251200R0202 07AI90-S Analog Input Module ABB
GJR5251300R0101 07KT93 07 KT 93 Central Processing Unit - 90 Series ABB
GJR5251300R0161 07KT93 07KT93 Central Unit - 90 Series ABB
GJR5251300R0171 07KT93,07KT93G 07KT93 Central Processing Unit ABB
GJR5251300R2171 07KT93-S 07 KT 93-S Central Processing Unit - 90 Series ABB
GJR5251400R0101 ICDG32L1 ICDG 32 L1 Input/Output Unit ABB
GJR5251400R0202 07DC91 Advant Controller 31 I/O Unit ABB
GJR5251400R3202 07DC91 Advant Controller 31 I/O Unit ABB
GJR5251500R101 07KP92 07 KP 92 Coupler Module ABB
GJR5251500R1101 07MK92 07KP92 AC31 S90 Communication Processor (07MK92) ABB
GJR5251500R1161 07KP92E1 Communication Processor Module ABB
GJR5251600R0202 07AI91 Analog Input Unit ABB
GJR5251666R1001 ICDT08B5 Analog Input Module ABB
GJR5251700R0101 07KP94 Master Field Bus Communication Module ABB
GJR5252000R0101 07KP95 Coupler for Advant Fieldbus AF 100 Network ABB
GJR5252100R0101 07KT94 Advant Controller 31 Basic Unit ABB
GJR5252100R0161 07KT94D, 07 KT 94K, 07 KT 94i Advant Controller 31 Basic Unit - 07KT94 ABB
GJR5252100R0201 07KT94 07KT94 CPU - Advant Controller 31 ABB

The use of the product: