ABB Module 07SK90R1 ABB 07SK90 R1 ABB 07SK90 R1 Carb Airhead High quality

ABB Module 07SK90R1 ABB 07SK90 R1 ABB 07SK90 R1 Carb Airhead High quality

Product Description:

The red LED Ovl. goes out when the overloaded output is switched on again automatically.
The acknowledgement of the error message, i.e. the resetting of the error flags, is carried out according to chapter B4.8 (Appendix), Acknowledgement of error messages in the basic unit.The outputs are safe against reverse polarity and forced supply of 24 V DC. Use of the digital output signal at the terminal 46
(A 62,00) for the high-speed counter The output A 62,00 can be assigned to the internal highspeed
counter by configuration. If the counter is used in the operating modes 1 or 2 (up-counter), the output A 62,00 is only available for the counter. If the output is to use as a normal digital output, it has to
be made sure, that the high-speed counter is not configured to the operating modes 1 or 2 (see also the chapter "High-speed counter").

Related Product Recommendation:

Product's Character:

It has to be taken into consideration, that in this application the M terminal of the basic unit 07 KT 94 is
the reference potential. AGND1 is not dimensioned for carrying the sum of the sensor currents. The value of the range underflow is stored. If the ope circuit monitoring is configured, the open-circuit event is displayed by the red LED Ovl as long as it is present. In the PLC system an error message is stored (FK4, error number 9). The following figure shows the connection of 2-pole passive- type analog sensors 4...20 mA. If the analog current sensors 4...20 mA are powered from a separate power supply unit, the reference potentials 0V (of the separate power supply unit and the power supply unit for the 07 KT 94) must be interconnected to each other.In the above example, the AGND terminal remains
unused.

DI/DO86 58172856 DI/DO86-32CH Terminal Block ABB
DI210 492953401 Digital Input Module ABB
DI620 3BHT300002R1 DI620 Digital Input Exchange, Module ABB
DI621 3BHT300012R1 DI621 Digital Input ABB
DI650 3BHT300025R1 Digital Input Module ABB
DI685 3BDS005833R1 Digital Input Module ABB
DI801 3BSE020508R1 S800 Digital Input Module ABB
DI802 3BSE022360R1 Digital Input Module ABB
DI803 3BSE022362R1 Digital Input Module ABB
DI810 3BSE008508R1 Digital Input Module ABB
DI811 3BSE008552R1 ABB Digital Input Module ABB
DI814 3BUR001454R1 DI814 Digital Input Module ABB
DI820 3BSE008512R1 DI820 Digital Input, 120 Vac ABB
DI821 3BSE008550R1 DI821 Digital Input - 230V ABB
DI821Z 3BSE035380R1 Digital Input Module - 230VAC ABB
DI830 3BSE013210R1 Digital Input SOE Module ABB
DI831 3BSE013212R1 Digital Input Module - 48 VDC SOE ABB
DI840 3BSE020836R1 Digital Input Module ABB
DI85-8B 57574771A, 5760228-7D DI 85-8B Digital Input Module ABB 1
DI86-32 57275782 Digital Input Board ABB
DI885 3BSE013088R1 Digital Input Module -SOE ABB
DI890 3BSC690073R1 DI890 Digital Input w/ Intrinsic Safety Interface ABB
DIO-400 PHBDIO40010000 Digital I/O Module - Harmony Block I/O ABB
DKL01501 Digital Servodrive DKL ABB
DLM 01 P 37421-4-0369652 DLM01 Link Module ABB
DLM 02 P 37421-4-0338434 DLM02 Link Module ABB
DO-02-16 FDO0216 Digital Output Module ABB
DO0116 FDO0116 Digital Output Module Bailey
DO210 492953501 Digital Output Module ABB
DO610 3BHT00006R1 Digital Output Module ABB

DO620 3BHT300009R1 DO620 Digital Output Module ABB
DO630 3BHT300007R1 Digital Output Module ABB
DO801 3BSE020510R1 S800L DO801 Digital Output ABB
DO802 3BSE022364R1 S800L DO802 Digital Output, Relay. ABB
DO810 3BSE008510R1 DO810 Digital Output Module ABB

The use of the product: