Allen Bradley Modules 1769-IA16 1769 IA16 AB 1769IA16 input module High reliability

Allen Bradley Modules 1769-IA16 1769 IA16 AB 1769IA16 input module High reliability

Product Description:

All drives come equipped with a fault LED. When the fault LED is illuminated it is an indication a fault condition exists. Refer to page 2-3 for the location of the fault LED. Once the fault is properly cleared the LED will return to an off state. Diagnostics As can be seen in Figure 2.3, there are two indicators
provided to display the drive’s status condition. The DC Bus Charge Indicator is a neon bulb that will be illuminated when power is applied to the drive. The Fault Indicator is an LED that will be illuminated if a drive fault condition exists. Refer to details on How To Clear a Fault, below.How To Clear a Fault Important: Resetting a fault will not correct the cause of the fault condition. Corrective action must be taken prior to resetting the fault. To clear a fault perform one of the following:Cycle power to the drive. Cycle the stop signal to the drive. Cycle the [Clear Fault] parameter.

Related Product Recommendation:

Product's Character:

Bulletin 1305 drive parameter data can be programmed and displayed using PLC’s, SLC’s or other logic controllers using an optional Bulletin 1203 Communication Module. The amount of information that can be transferred between the drive and controller is determined by the DIP switch settings on theCommunication Module. Table B.1 illustrates the dip switch settings for Bulletin 1203-GD1 (Remote I/O) communication modules. Dip switch settings for other communication modules will be similar. Refer
to the appropriate communication module user manual for details.Important: 1305 drives with firmware revisions FRN1.01 and FRN1.02 are not compatible with Bulletin 1203 Communication Modules. If connected, an error message will be indicated. The red fault status and amber SCANport status LED’s on the front of the module will flash simultaneously.

1771-WN Field Wiring Arm 32 Terminals AB
1772-CS Processor/Scanner Interconnect Cable AB
1772-LH Processor Interface Module AB
1772-LN2 CPU Module AB
1772-LP2 PLC-2/20 PLC-2/20 Processor Unit AB
1772-LP3 PLC-2/30 PLC-2/30 Processor Unit AB

1772-LS PLC-2/05 PLC-2/05 Processor AB
1772-LW PLC 2/17 MINI PLC 2/17 Processor AB
1772-LWP D PLC2 DNGL SL 6K Proc AB
1772-LX/C PLC 2/16 Mini PLC 2/16 Processor AB
1772-LX/D PLC 2/16 Mini PLC 2/16 Processor AB
1772-LXP Mini PLC 2/16 Processor AB
1774-MA 4 K Memory Module AB
1774-SD Remote I/O Module AB
1774-SR Remote I/O Half Scanner Module AB
1774-TB2 Interface Module AB
1775-A3 PLC-3/10 PLC-3 Chassis AB
1775-KA Communication Adapter AB
1775-L4 Main Processor Module AB
1775-MS4 Error Correcting Memory 16K Ram AB
1775-P2 Power Supply AB
1775-P3 Multi-Output Power Supply AB
1775-SR5 I/O Scanner Communications Module AB
1777-CP Terminator AB
1784-CP13 2801–N8 Video Interface Cable AB
1784-KT/B ISA/EISA Communication Module AB
1784-KTX ISA Communication Module AB
1784-PCICS PCI Bus Messaging Module AB
1784-PKTX/A PCI Network Interface Card - Series A AB
1784-PKTX/B PCI Network Interface Card - Series B AB
1785-ENET/A 96204473 Ethernet Interface Module AB
1785-KA Communication Adapter Module AB
1785-KA3 DH PLC-2 INTFC Communication Adapter Module AB
1785-L11B /11 /11 Processor Module AB
1785-L20B/C /20 /20 Processor Module - Series C AB
1785-L20B/E /20 /20 Processor Module AB

1785-L30B/A PLC -5/30 PLC -5/30 Processor - Series A AB
1785-L30B/C PLC -5/30 PLC -5/30 Processor - Series C AB
1785-L30B/D PLC -5/30 PLC -5/30 Processor - Series D AB
1785-L40B/C /40 /40 Processor Module - Series C AB
1785-L40B/D /40 /40 Processor Module - Series D AB
1785-L40B/E /40 /40Processor Module - Series E AB
1785-L40C15/E PLC -5/40 PLC -5/40 CONTROLNET Processor - Series E AB
1785-L40C15/F PLC -5/40 PLC -5/40 CONTROLNET Processor - Series F AB
1785-L60B PLC5/60 Processor Module AB
1785-L60B/C PLC -5/60 PLC -5/60 Processor - Series C AB
1785-LT/B Processor Module AB

The use of the product: