Allen Bradley Modules 1769-IR6 1769 IR6 AB 1769IR6 RTD/Resistance Input 12 month warranty

Allen Bradley Modules 1769-IR6 1769 IR6 AB 1769IR6 RTD/Resistance Input 12 month warranty

Product Description:

After starting RSLogix 5000 and either starting a new project or opening an existing project, make sure
that you are OFFLINE with the ControlLogix processor. I/O configuration is only available when offline.
If you have not already defined the contents of your ControlLogix chassis under your project's "I/O
Configuration" folder, you will need to define the ControlNet bridge module at a minimum. Use the right
mouse button to click on the "I/O Configuration" folder, then choose "New Module" from the pop-up menu.From the dialog box that appears, choose the ControlNet bridge of the type (1756-CNB or 1756-CNBR)and series that you are using. In the next screen, you will need to name the ControlNet bridge and
indicate its position in the ControlLogix chassis (slot 0 is the leftmost).After defining the ControlNet bridge, use the right mouse button to click on the ControlNet bridge under"I/O configuration", then choose "New Module" from the pop-up menu

Related Product Recommendation:

Product's Character:

For the requested packet interval, enter the number of milliseconds desired between each I/O message
between the ControlLogix processor and the 1203-CN1. The 1203-CN1 can handle a packet interval as
low as 5 milliseconds; therefore, make sure that this value is set to at least Click the "Finish" button to
complete the configuration of the I/O connection in RSLogix 5000. At this point, download your configuration to the ControlLogix processor, then exit RSLogix 5000. To actually schedule the I/O, you will need to start RSNetWorx for ControlNet. Once RSNetWorx starts, go online to the ControlNet network
containing the ControlLogix chassis and 1203-CN1 being configured. Turn on the "Enable Edits" check box, then save the network. This causes the I/O connection created in RSLogix 5000 to be scheduled in the ControlLogix processor. After a few seconds, the I/O LED on the ControlLogix processor and the module LED on the 1203-CN1 should stop blinking and remain green. If they do not, it could indicate a number of I/O-related problems

1746-IH16 Current Sinking DC Input Module AB

1746-IM16 240V AC Input Module AB
1746-IM4 240V AC Input Module AB
1746-IM8 240V AC Input Module AB
1746-IN16 24V AC/DC Input Module AB
1746-INT4 Thermocouple Input Module AB
1746-IO12 Combination Input/Output Module AB
1746-IO4 Combination Input/Output Module AB
1746-IO8 Combination Input/Output Module AB
1746-ITB16 Fast Response DC Sinking Input Module AB
1746-ITV16 Fast Response DC Sourcing Input Module AB
1746-IV16 Current Sourcing DC Input Module AB
1746-IV32 Current Sourcing DC Input Module AB
1746-IV8 Current Sourcing DC Input Module AB
1746-N2 Card Slot Filler AB
1746-NI16I High Resolution Analog Input Module - Current AB
1746-NI16V High Resolution Analog Input Module - Voltage AB
1746-NI4 High Resolution Analog Input Module AB
1746-NI8 High Resolution Analog Input Module AB
1746-NIO4I High Resolution Analog Input/Output Module AB
1746-NIO4V High Resolution Analog Input/Output Module AB
1746-NO4I Analog Current Output Module AB
1746-NO4V Analog Voltage Output Module AB
1746-NO8I Analog Current Output Module AB
1746-NO8V Analog Voltage Output Module AB
1746-NR4 RTD Input Module AB
1746-NR8 RTD Input Module AB
1746-NT4 Thermocouple Input Module AB
1746-NT8 Thermocouple Input Module AB
1746-OA16 120/240V AC Output Module AB
1746-OA8 120/240V AC Output Module AB

The use of the product: