Allen Bradley Modules 1788-CN2FF 1788 CN2FF AB 1788CN2FF ControlNet to DeviceNet, Works

Product Description

Allen Bradley Modules 1788-CN2FF 1788 CN2FF AB 1788CN2FF ControlNet to DeviceNet, Works

Product Description:

The ground conductor of the motor cable should be connected to the drive ground (GRD) terminal directly. Connecting this ground conductor to a cabinet ground point or ground bus bar may cause high frequency current to circulate in the ground system of the enclosure. The motor end of this ground
conductor must be solidly connected to the motor case ground. Shielded or armored cable may be used to guard against radiated emissions from the motor cable. The shield or armor should be connected to the drive ground terminal and the motor ground as outlined in the Grounding section of this Installation
chapter. Common mode chokes are recommended at the drive output to reduce the common mode noise. An RFI filter can be used and in most situations provides an effective reduction of RFI emissions that may be conducted into the main supplylines. If the installation combines a drive with sensitive devices or circuits,it is recommended that the lowest possible drive PWM frequency be programmed.

Related Product Recommendation:

Product's Character:

ULTRA 100 and 200 drives are feature-rich, high-performance drives that offer the flexibility to handle a wide range of applications. You can set up the ULTRA 100/200 drives as indexing drives, velocity servo drives, stepper drives, or master encoder followers. With the DeviceNet option, you can remotely commission and reprogram ULTRA 100 drives. In addition, you can use the ULTRA 100/200
drives host command protocol to set up multiple drives. Available in seven power ranges, theULT RA100/200 drives can be mated to four high-performance brushless servo motor lines. Ultra Master software, a Windows-based interface, provides you with a familiar programming environment and a powerful commissioning tool for all ULTRA 100/200 drives.ULTRA 200 positioning drives deliver full-featured flexibility and impressive power and performance. Each ULTRA 200 drive provides:115 to 230V AC single phase input (single phase or three phase for the 75 amp version, three phase only for the 150 amp version) Phase-to-phase and phase-to-ground short circuit protection An internal resistive shunt A built-in auxiliary AC input (to power logic only) Built-in power supplies (including 24V I/O supply)—no external sourcerequired (except AC line) The ability to drive sinusoidal AC brushless motors An DC bus available externally for power leveling or for use of shared power supplies

1793-OW4S Relay Contact Output Module AB
1794-ACN15 ControlNet Adaptor AB
1794-ACN15K ControlNet Adaptor AB
1794-ACNR15 ControlNet Adaptor AB
1794-ACNR15XT ControlNet Adaptor AB
1794-ADN DeviceNet Adaptor AB
1794-ADNK DeviceNet Adaptor AB
1794-AENT Ethernet Adaptor AB
1794-AENTR Ethernet Adaptor AB
1794-AENTRXT Ethernet Adaptor AB
1794-APB Profibus DP Adaptor AB
1794-APBDPV1 Profibus DP V1 Adaptor AB
1794-ASB 96265871,960404877 Remote I/O Adaptor AB
1794-ASB2 Remote I/O Adaptor AB
1794-CE1 Extender Cable AB
1794-IA16 Digital Input Module AB
1794-IA8 Digital Input Module AB
1794-IA8I Digital Input Module AB
1794-IB10XOB6 Digital Input/Output Module AB
1794-IB10XOB6XT Digital Input/Output Module AB
1793-IE2XOE1 Analog Combo Module AB
1793-IE2XOE1S Analog Combo Module AB
1793-IE4 Analog Input Module AB
1793-IE4S Analog Input Module AB
1793-IV16 Digital Input Module AB

1793-IV16S Digital Input Module AB
1793-OB16P Digital Output Module AB
1793-OB16PS Digital Output Module AB
1793-OB4P Digital Output Module AB
1793-OB4PS Digital Output Module AB
1793-OE2 Analog Output Module AB
1793-OE2S Analog Output Module AB
1793-OV16P Digital Output Module AB
1793-OV16PS Digital Output Module AB
1793-OW4 Relay Contact Output Module AB

ASM 2506661-21 Circuit Board Revision B1 Used Working

ASM 2506416-21 Circuit Board Revision B Used Working

ASM 2506661-21 Circuit Board Revision C Used Working

AMAT 0200-76058 Quartz Pedestal Large Pin Diameter 300mm cleaned used working

ASM 1001-524-21 Circuit Board Revision A Used Working

ASM 2856735-21 Circuit Board Revision A2 Used Working

ASM 2506475-21 Circuit Board Revision A1 Used Working

ASM 2506572-21 Circuit Board Revision A1 Used Working

ASM 2890224-21 Circuit Board Revision A Used Working

ASM 2334801-21 Circuit Board Revision B Used Working

ASM 2510200-21 Circuit Board Revision B Used Working

ASM 2548860-21 Circuit Board Revision A Used Working

ASM 2616351-21 Circuit Board Revision A Used Working

ASM 2506513-21 Circuit Board Revision A1 Used Working

ASM 2506564-21 Circuit Board Revision A5 Used Working

ASM 2506629-21 Circuit Board Revision 4-C Used Working

ASM 73055-72359 Exhaust Duct CBS-RC1 used working

The use of the product: