Allen Bradley Modules 2711-K10C15L1 2711K10C15L1 AB 2711 K10C15L1 NEW IN BOX

Allen Bradley Modules 2711-K10C15L1 2711K10C15L1 AB 2711 K10C15L1 NEW IN BOX

Product Description:

Bulletin 1305 drive parameter data can be programmed and displayed using PLC’s, SLC’s or other logic controllers using an optional Bulletin 1203 Communication Module. The amount of information that can be transferred between the drive and controller is determined by the DIP switch settings on theCommunication Module. Table B.1 illustrates the dip switch settings for Bulletin 1203-GD1 (Remote I/O) communication modules. Dip switch settings for other communication modules will be similar. Refer
to the appropriate communication module user manual for details.Important: 1305 drives with firmware revisions FRN1.01 and FRN1.02 are not compatible with Bulletin 1203 Communication Modules. If connected, an error message will be indicated. The red fault status and amber SCANport status LED’s on the front of the module will flash simultaneously.

Related Product Recommendation:

Product's Character:

The name of the tag will reflect the name you assigned the earlier. The "C" sub-group contains the contents of the configuration assembly, which is not currently used in the 1203-CN1. The "O" subgroup contains one entry for each word of output data you configured, and the "I" sub-group contains one entry for each word of input data you configured. The "O" sub-group corresponds directly to output data for a PLC-5 described on page 5-2 of the 1203-CN1 user manual (i.e., for most common configurations, word 0 is the logic command, word 1 is the speed reference, words 2 and 3 are the first pair of data links, etc.). The "I" sub-group is similar to the input data for a PLC-5, except that it is shifted by two words (i.e., word 2 is the logic status, word 3 is the speed feedback, etc.). Words 0 and 1 of the "I" sub-group represent network status data sent by the 1203-CN1 but not processed directly by the ControlLogix processor. At this point, I/O between the ControlLogix processor and the 1203-CN1 should be configured and running, and the meaning of the various I/O words should be understood. If you need further assistance in configuring I/O, please contact technical support.

1793-IB4S Digital Input Module AB
1793-IE2XOE1 Analog Combo Module AB
1793-IE2XOE1S Analog Combo Module AB
1793-IE4 Analog Input Module AB
1793-IE4S Analog Input Module AB
1793-IV16 Digital Input Module AB

1793-IV16S Digital Input Module AB
1793-OB16P Digital Output Module AB
1793-OB16PS Digital Output Module AB
1793-OB4P Digital Output Module AB
1793-OB4PS Digital Output Module AB
1793-OE2 Analog Output Module AB
1793-OE2S Analog Output Module AB
1793-OV16P Digital Output Module AB
1793-OV16PS Digital Output Module AB
1793-OW4 Relay Contact Output Module AB
1793-OW4S Relay Contact Output Module AB
1794-ACN15 ControlNet Adaptor AB
1794-ACN15K ControlNet Adaptor AB
1794-ACNR15 ControlNet Adaptor AB
1794-ACNR15XT ControlNet Adaptor AB
1794-ADN DeviceNet Adaptor AB
1794-ADNK DeviceNet Adaptor AB
1794-AENT Ethernet Adaptor AB
1794-AENTR Ethernet Adaptor AB
1794-AENTRXT Ethernet Adaptor AB
1794-APB Profibus DP Adaptor AB
1794-APBDPV1 Profibus DP V1 Adaptor AB
1794-ASB 96265871,960404877 Remote I/O Adaptor AB
1794-ASB2 Remote I/O Adaptor AB
1794-CE1 Extender Cable AB
1794-IA16 Digital Input Module AB
1794-IA8 Digital Input Module AB
1794-IA8I Digital Input Module AB
1794-IB10XOB6 Digital Input/Output Module AB
1794-IB10XOB6XT Digital Input/Output Module AB

The use of the product: