Allen Bradley Modules A26491-A D31705-1 A26491 A D31705 1 STOCK EQUIPMENT

Allen Bradley Modules A26491-A D31705-1 A26491 A D31705 1 STOCK EQUIPMENT

Product Description:

Manual, gives an overall description of the Bulletin 1305 Adjustable Frequency AC Drive (herein called “the drive”) and provides a listing of key drive options. Additionally, this chapter provides information on receiving and handling the drive. MANUAL OBJECTIVES The purpose of this manual is to provide
the user with the necessary information to install, program, start up and maintain the Bulletin 1305 drive. To assure successful installation and operation, the material presented must be thoroughly read and
understood before proceeding. Particular attention must be directed to the ATTENTION and Important statements contained within. Chapter 2 provides instructions on how to mount and wire the drive. It also describes how to operate the drive without a Human Interface Module. Read the Motor Cable Length
section on pages 2-13 – 2-16, and the contact closure inputs information in the Control Terminal Block descriptions on pages 2-19 – 2-21. Chapter 3 defines the display and control panel keys on the optional Human Interface Module. A flowchart is provided to guide the user through the key strokes of the various
menu levels.

Related Product Recommendation:

Product's Character:

The Remote I/O communications module allows a SCANport product to look and act like a Remote I/O chassis when connected to a programmable controller. Data contained in the input/output image table is transferred between the programmable controller by the Remote I/O scanner, the same as with any Remote I/O chassis. You control the location of data transferred by setting the rack address and
starting group. You control the amount of data by setting the DIP switches on SW3. Important: Thecommunications module does not scale the data that is transferred. Consequently, all scaling of the data must be done in the controller. Refer to the user manual for your SCANport product for details on
device units. Important: The Remote I/O to SCANport conversion is asynchronous. Data sent to the adapter for transfer to the drive must be maintained until the drive has received data.DIP switches on SW3 determine how the data contained in the programmable controller I/O image table is used in the drive. Figure shows an I/O image table.

1747-ACN15 ControlNet Adapter Module AB
1747-ACNR15 ControlNet Adapter Module AB
1747-AIC Isolated Link Coupler AB
1747-ASB Remote I/O Adapter AB
1747-BSN Backup Remote I/O Scanner AB
1747-C11-A Programmer Cable AB
1747-DCM 1747-DCM A Direct Communication Module AB
1747-DPS2 Configurable Port Splitter AB
1747-FC Ferrite Collar AB
1747-KE Interface Module AB
1747-KFC15 ControlNet Messaging Module AB
1747-L20A/A 1747-L20A Processor Unit - Series A AB
1747-L20A/B 1747-L20A Processor Unit - Series B AB
1747-L20A/C 1747-L20A Processor Unit - Series C AB
1747-L20B/B 1747-L20B Processor Unit - Series B AB
1747-L20C/B 1747-L20C Processor Unit - Series B AB
1747-L20C/C 1747-L20C Processor Unit - Series C AB
1747-L30A/B 1747-L30A Processor Unit - Series B AB
1747-L30B/B 1747-L30B Processor Unit - Series B AB
1747-L30C/B 1747-L30C Processor Unit - Series B AB
1747-L40A/B 1747-L40A Processor Unit - Series B AB
1747-L40A/C 1747-L40A Processor Unit - Series C AB
1747-L40B/B 1747-L40B Processor Unit - Series B AB
1747-L40L 1747-L40L Processor Unit - Series A AB
1747-L511 SLC 5/01 SLC 5/01 Controller AB
1747-L511/A SLC 5/01 SLC 5/01 Controller AB
1747-L511/B SLC 5/01 SLC 5/01 Controller AB
1747-L514/A SLC 5/01 SLC 5/01 Controller AB
1747-L514/B SLC 5/01 SLC 5/01 Controller AB
1747-L524/C SLC 5/02 SLC 5/02 Controller AB

1747-L531/D SLC 5/03 SLC 5/03 Control Processor AB
1747-L531/E SLC 5/03 SLC 5/03 Control Processor AB
1747-L532/A SLC 5/03 SLC 5/03 Control Processor AB
1747-L532/B SLC 5/03 SLC 5/03 Control Processor AB

CTI Cryogenics G060 Stainless 5 FT Braid Hose 8043074

CTI Cryogenics 8043075G120 10FT Stainless Steel Braid Hose 055-04 NTB 260 PSI

LEITZ WETZLAR MICROSCOPE AF KEYPAD CONTROLLER 301-305.562

NORDSON MAGNETRON 775130

STEC SEF-21 Mass Flow Controller Floline 1 LM

NT International 6500-T2-F02-H04-M-P2-U1 Integrated Flow Controller 6500

NT International 6500 Integrated Flow Controller 6500-T4-F03-H04-M-P2-U1

NT International 6500-T5-F03-H04-M-P2-U1 Integrated Flow Controller 6500

NT International 6500-T6-F03-H04-M-P2-U1 Integrated Flow Controller 6500

PRECISE SENSORS 3441-0006501C6WSE02L0002 0-65 PSIA

Aera FC-D985CT-BH Mass Flow Controller 200 SCCM HBr

Mykrolis IntelliFlow II Digital Flow Controller DSSAE100 2000 SCCM Ar

WHITMAN CONTROLS PRESSURE SWITCH J205G-25S-C52L-X

Tylan FC-2979MEP5 Mass Flow Controller 50 SCCM CH2F2

NEW Millipore FC-2952MEP5-T Mass Flow Controller 10 SLPM HE

The use of the product: