Allen Bradley Modules D31705-1 A26491-A D31705 1 A26491 A STOCK EQUIPMENT

Allen Bradley Modules D31705-1 A26491-A D31705 1 A26491 A STOCK EQUIPMENT

Product Description:

When the drive mounted HIM is supplied, it will be connected as Adapter 1 (see Adapter in Chapter 2) and visible from the front of the drive. The HIM can be divided into two sections; Display Panel and Control Panel. The Display Panel provides a means of programming the drive and viewing the various
operating parameters. The Control Panel allows different drive functions to be controlled. Refer to Figure and the sections that follow for a description of the panels.Important: The operation of some HIM functions will depend upon drive parameter settings. The default parameter values allow full HIM
functionality.HIM OPERATION When power is first applied to the drive, the HIM will cycle through a series of displays. These displays will show drive name, HIM ID number and communication status. Upon
completion, the Status Display will be shown. This display shows the current status of the drive (i.e. “Stopped,”“Running,” etc.) or any faults that may be present (“Serial Fault,” etc.). If the HIM software is Series A version3.00

Related Product Recommendation:

Product's Character:

The Remote I/O communications module allows a SCANport product to look and act like a Remote I/O chassis when connected to a programmable controller. Data contained in the input/output image table is transferred between the programmable controller by the Remote I/O scanner, the same as with any Remote I/O chassis. You control the location of data transferred by setting the rack address and
starting group. You control the amount of data by setting the DIP switches on SW3. Important: Thecommunications module does not scale the data that is transferred. Consequently, all scaling of the data must be done in the controller. Refer to the user manual for your SCANport product for details on
device units. Important: The Remote I/O to SCANport conversion is asynchronous. Data sent to the adapter for transfer to the drive must be maintained until the drive has received data.DIP switches on SW3 determine how the data contained in the programmable controller I/O image table is used in the drive. Figure shows an I/O image table.

1747-L532/C SLC 5/03 SLC 5/03 Control Processor AB
1747-L532/D SLC 5/03 SLC 5/03 Control Processor AB
1747-L532/E SLC 5/03 SLC 5/03 Control Processor AB
1747-L541/B SLC 5/04 SLC 5/04 Processor - Series B AB
1747-L541/C SLC 5/04 SLC 5/04 Processor - Series C AB
1747-L542/A SLC 5/04 1747-L542 Processor - Series A AB
1747-L542/B SLC 5/04 1747-L542 Processor - Series B AB
1747-L542/C SLC 5/04 1747-L542 Processor - Series C AB
1747-L543/B SLC 5/04 Processor - Series B AB
1747-L543/C SLC 5/04 Processor - Series C AB
1747-L551/A SLC 5/05 SLC 5/05 Controller AB
1747-L551/B SLC 5/05 SLC 5/05 Controller AB
1747-L551/C SLC 5/05 SLC 5/05 Controller AB
1747-L552/A SLC 5/05 1747-L552 Processor - Series A AB
1747-L552/B SLC 5/05 1747-L552 Processor - Series B AB
1747-L552/C SLC 5/05 1747-L552 Processor - Series C AB
1747-L553/A SLC 5/05 Controller AB
1747-L553/B SLC 5/05 Controller AB
1747-L553/C SLC 5/05 Controller AB
1747-M1 1 K EEPROM Memory Module AB
1747-M11 Flash Memory Module - 32K AB
1747-M12 Flash Memory Module - 64K AB
1747-M13 64 K Flash EPROM Memory Module AB
1747-M15 Adapter Socket AB
1747-M2 4 K EEPROM Memory Module AB
1747-M5 Adapter Socket AB

1747-NP1 Wall Mount Power Supply AB
1747-OCKTX Open Controller - Communication Interface Module AB
1747-OCPCI4 Open Controller PCI Backplane AB
1747-OCVGA1 Open Controller - VGA Interface Module AB
1747-PIC PC Interface Converter AB
1747-PSD Program Storage Device AB
1747-PT1 Hand Held Terminal AB

CTI Cryogenics G060 Stainless 5 FT Braid Hose 8043074

CTI Cryogenics 8043075G120 10FT Stainless Steel Braid Hose 055-04 NTB 260 PSI

LEITZ WETZLAR MICROSCOPE AF KEYPAD CONTROLLER 301-305.562

NORDSON MAGNETRON 775130

STEC SEF-21 Mass Flow Controller Floline 1 LM

NT International 6500-T2-F02-H04-M-P2-U1 Integrated Flow Controller 6500

NT International 6500 Integrated Flow Controller 6500-T4-F03-H04-M-P2-U1

NT International 6500-T5-F03-H04-M-P2-U1 Integrated Flow Controller 6500

NT International 6500-T6-F03-H04-M-P2-U1 Integrated Flow Controller 6500

PRECISE SENSORS 3441-0006501C6WSE02L0002 0-65 PSIA

Aera FC-D985CT-BH Mass Flow Controller 200 SCCM HBr

Mykrolis IntelliFlow II Digital Flow Controller DSSAE100 2000 SCCM Ar

WHITMAN CONTROLS PRESSURE SWITCH J205G-25S-C52L-X

Tylan FC-2979MEP5 Mass Flow Controller 50 SCCM CH2F2

NEW Millipore FC-2952MEP5-T Mass Flow Controller 10 SLPM HE

The use of the product: