ABB Module DSQC104 6369901-104 ABB DSQC104 CIRCUIT BOARD CARD DSQC High reliability

Product Description

ABB Module DSQC104 6369901-104 ABB DSQC104 CIRCUIT BOARD CARD DSQC High reliability

Product Description:

For configuration see preceding page. If input values overflow or underflow the measuring range, the values 32767 or -32767 are output. Resolution in the control system: All measured values will be converted with a resolution of 12 bits which are either 11 bits + sign or 12 bits without sign. Examples:
Measuring range Range of numerical display 10 V32760D....0....32760D 8008H...0000H...7FF8H 0...20 mA 32760D 7FF8H  The relationship between analog signal and converted numerical value is shown in the following figure.For configuration please see second preceding page.
Resolution in the control system:The converted analog values of two analog channels are packed into a word with 8 bit each (low byte and high byte).The smallest difference that can be detected on the analog
side (e.g. 40 mV in the range of 0...10 V) results in a change of the numeric value by 1 in the PLC program. ExamplesThe relationship between analog signal and converted numerical
value is shown in the following figure.

Related Product Recommendation:

Product's Character:

In general, the technical system data listed under ”System data and system configuration” in chapter 1 of volume 2 ofthe Advant Controller 31 system description are valid. Additional data or data which are different from the system dataare listed as follows.(of the 07 KT 97 and of the communication
processor) are assembled by means of a snap-on connection.The SmartMedia Card serves for storing data up to 2 MB not being lost over an power OFF/ON cycle. It is used in the 07 KT 97 basic unit. It is recommended only to use ABB-proven SmartMedia Cards. Field of application Storing and loading of PLC programs Storing and loading of user data  there are 250 data segments with 128 blocks
each available (1 block = 32 words). Loading of firmware updates

The use of the product: