ABB Module PU515A 3BSE032401R1 ABB PU515A 3BSE032401-R1 RTA board for PCI New Sealed

ABB Module PU515A 3BSE032401R1 ABB PU515A 3BSE032401-R1 RTA board for PCI New Sealed

Product Description:

Use of analog inputs as digital inputs Several (or all) analog inputs can be configured as digital inputs. When doing so, they evaluate input voltages higher than ca. +7 V as signal 1. The input impedance in this
operating mode is about 4 kW. Terminal M is the reference potential. The input signal delay is 7 ms. It cannot be configured. The inputs are not electrically isolated. they may be shorted to AGND. Unused inputs must be configured with "unused". The relationship between the analog input signals and the converted numbers is illustrated in the following figures. be made sure, that the high-speed counter is not configured to the operating modes 1 or 2 (see also the chapter "High-speed counter").Features of the analog inputs:The 8 analog inputs are not electrically isolated.The resolution of the A/D converter is 12 bits. Analog signals are conducted in shielded cables (seeThe analog inputs can be configured individually in a lot of different operating modes (even as digital inputs). The configuration is performed by setting certain bits in the system constants KW 86,00 to KW 86,07 as follows

Related Product Recommendation:

Product's Character:

The red LED Ovl. goes out when the overloaded output is switched on again automatically.
The acknowledgement of the error message, i.e. the resetting of the error flags, is carried out according to chapter B4.8 (Appendix), Acknowledgement of error messages in the basic unit.The outputs are safe against reverse polarity and forced supply of 24 V DC. Use of the digital output signal at the terminal 46
(A 62,00) for the high-speed counter The output A 62,00 can be assigned to the internal highspeed
counter by configuration. If the counter is used in the operating modes 1 or 2 (up-counter), the output A 62,00 is only available for the counter. If the output is to use as a normal digital output, it has to
be made sure, that the high-speed counter is not configured to the operating modes 1 or 2 (see also the chapter "High-speed counter").

DC 371a GJR2 237100 R1, GJR2237100R0001 DC 371a Group Control Module ABB
DC 372a GRJ2 238200R1 , GRJ2238200R0001 Step Control Module ABB
DC 375a GJR2 304400 R1, GJR2304400R0001 DC375a Operating Mode Controller Module ABB
DC 722F A0 3BDH000372R0001 Digital Input/Output Module ABB
DCO 01 0369666 DCO01 Serial Interface Module ABB
DCP 02 P 37211-4-0369654 DCP 02 CPU Module ABB
DCP 10 P37211-4-0338701 DCP10 CPU Module ABB
DCS800-DEMOCASE Field Kit ABB
DCS800-EP1-0020-05 Module Drive ABB
DCS800-EP1-0045-05 Module Drive ABB
DCS800-EP1-0065-05 Module Drive ABB
DCS800-EP1-0090-05 Module Drive ABB
DCS800-EP1-0125-05 Module Drive ABB
DCS800-EP1-0180-05 Module Drive ABB
DCS800-EP1-0230-05 Module Drive ABB
DCS800-EP1-0315-05 Module Drive ABB
DCS800-EP1-0405-05 Module Drive ABB
DCS800-EP1-0470-05 Module Drive ABB
DCS800-EP1-0610-05 Module Drive ABB
DCS800-EP2-0020-05 Module Drive ABB
DCS800-EP2-0045-05 Module Drive ABB
DCS800-EP2-0065-05 DCS800-EP2-0065-05 ABB
DCS800-EP2-0090-05 Module Drive ABB
DCS800-EP2-0125-05 Module Drive ABB

DCS800-EP2-0180-05 Module Drive ABB
DCS800-EP2-0230-05 Module Drive ABB
DCS800-EP2-0315-05 Module Drive ABB
DCS800-EP2-0405-05 Module Drive ABB
DCS800-EP2-0470-05 Module Drive ABB
DCS800-EP2-0610-05 Module Drive ABB
DCS800-PAN Field Kit ABB
DCS800-S01-0020-05 Module Drive ABB
DCS800-S01-0045-05 Module Drive ABB
DCS800-S01-0065-05 Module Drive ABB
DCS800-S01-0090-05 Module Drive ABB

The use of the product: