DP660 ABB DP660 24V/2.5A , 5V/0.5A Dual Output Power supply
Email:miya@mvme.cn
The vibration technique offers many unique advantages over alternative level sensing technologies:
- no problems at material changes in the silo: the function does not depend on material characteristics, e.g. dielectricity
- no readjustment required: unaffected by environmental changes e.g. temperature, pressure, humidity
- unaffected by dust clouds and agitation
- no maintenance required: the vibration has a self cleaning effect
- high durability: no moving parts, no wear-out
reliable function due to unique patented single rod design
- the DP660 has only one single rod that comes in touch with the material to be detected; thus the typical bridging problem, where material builds a bridge from one rod to the other, well known at instruments with so called “tuning fork“ designs, is ruled out
- material build-up on the container wall has no influence on the function of the DP660 as only the tip of the vibrating blade is sensitive and not the base
| Probe: |
stainless steel 1.4301 / AISI 304 resonance frequency approx. 460 Hz |
| Process Connection |
thread 1“ DIN 2999 or 1“ NPT |
| Electrical Connection: |
via plug DIN43650 |
| Power Supply: |
24V-DC ± 10% |
| Output: |
transistor output, optically isolated NPN or PNP type depending on wiring 350mA @ 24V-DC, shorttime max. 1A max. power 20W power loss max. 3V max. leakage current 100µA short circuit proof |
| Indication: |
output signal: red LED on connector |
| Time Delay: |
1 second from stop of vibration 2 to 5 seconds for start of vibration |
RELATED PRODUCTS
| AB |
1768-CNB |
BENTLY |
125720-01 |
| AB |
1768-CNBR |
BENTLY |
125760-01 |
| AB |
1768-ENBT |
BENTLY |
125768-01 |
| AB |
1768-EWEB |
BENTLY |
125840-02 |
| AB |
1768-KY1 |
BENTLY |
128240-01 |
| AB |
1768-L43 |
BENTLY |
133396-01 |
| AB |
1768-L43S |
BENTLY |
133819-01 |
| AB |
1768-L45 |
BENTLY |
135137-01 |
| AB |
1768-L45S |
BENTLY |
136188-02 |
| AB |
1768-M04SE |
BENTLY |
146031-01 |
| AB |
1768-PA3 |
BENTLY |
172103-01 |
Your message must be between 20-3,000 characters!
