Product Specification
Brand/Manufacturer | GE/USA |
Part Number |
DS200SIOCG1A |
Alternate Part Number |
DS200SIOCG1A |
Description |
VME Stand I/O Board |
Dimennsions | 3.4*13*10cm |
Weight | 0.26kg |
Product Details
The GE VersaModular Eurocard (VME) Stand I/O Board DS200SIOCG1A
features five wire terminals that can connect to a maximum of 33 signal
wires. It is also populated with one fuse and four 2-pin connectors. The
wire terminal blocks on the GE VME Stand I/O Board DS200SIOCG1A
are labeled TB-1, TB-2, TB-3, TB-4, and TB-5 on the board. The wires
carry signals that are transmitted by the board or are received by the board
during processing. The wires are held in place with screws that secure the
wires in the terminals. Each terminal also has an identifier printed on the
board.
When you replace the board you must first tag each wire connected to a
terminal with the ID assigned to the terminal to which it is attached. Then,
when all power is removed from the board, you can loosen the screws that
secure the wire in the terminal. Check to make sure the tag is attached to
the wire and that is has the right terminal ID written on it. Bend the signal
wires out of the way so you can remove the old board and install the
replacement board.
GE News
GE-led Consortium to Build Two High-Efficiency, Lower Emission HA Combined Cycle
Power Units at Dolna Odra Power Plant in Poland:
PGE’s Dolna Odra Plant will be equipped with two GE 9HA.01 gas turbines, two
steam turbines, two generators and two heat recovery steam generators to deliver
world-class efficiency and flexibility for the combined cycle power plant.
More Products
GE | DS200LDCCH1A | GE | 531X133PRUAMG1 |
GE | DS200TBQBG1ACB | GE | 531X139APMASM7 |
GE | IS2020ISUCG3A | GE | 531X124MSDAJG2 |
GE |
IC660CBB902K |
GE | 531X300CCHAGM5 |
GE | DS200TCDAH1BHD | GE |
IC600LX624L |
GE | 531X121PCRALG1 | GE | IC660CBB902K |
GE |
IC600BF929K |
GE | IC600BF929K |
GE | IC600FP832K | GE | IC660FP8900K |
Contact Us