2094-BM02-S 2094BM02S AB AB Kinetix 6000 Axis Module

2094-BM02-S 2094BM02S AB AB Kinetix 6000 Axis Module

⇒ Click here for good price 2094-BM02-S

Contact Us

Email: miya@mvme.cn (CLICK)

QQ: 2851195450

Tel: 86-18020776792(CLICK)

Skype:miyazheng520(CLICK)

Product Details

The AB 2094-BM02-S is a multi-axis servo drive that belongs to the Kinetic 6000 series. This servo drive has been designed and manufactured by AB. The AB 2094-BM02-S multi-axis servo drive operates with a voltage of 400 to 460 Volts AC and an amperage of 15 Amps. This servo drive is compatible with servo motors from the Kinetic 6000 series. Its voltage is a 3-phase voltage and this drive usually includes this voltage configuration with or without the line interface nodules and the DC common bus configurations. Prior to the installation of the AB 2094-BM02-S multi-axis servo drive, clearances should be made around the top and the bottom of the drive in order to allow proper airflow. This is important in order to guarantee smooth operations and prevent overheating. Its installation cabinet depth must be a minimum of 10.7 inches. If the drive is going to be installed in a cabinet, this cabinet should be tall enough to fit the drive and enable it to have a ventilation mechanism from an external cooling system.

If the AB 2094-BM02-S multi-axis servo drive is going to be installed in an enclosure, its unshielded cables must be kept as short as possible and the shunt power cables must be separated from sensitive cables. The AB 2094-BM02-S multi-axis servo drive must be used with circuit protection. The use of a circuit breaker or a fuse might help to maintain the drive in good condition since it prevents the occurrence of short circuits and further abnormalities when it comes to currents. When something goes wrong, the power-transistor control signal is disabled, removing motor torque without shutting down the entire 2094-BM02-S drive. This reduces production and energy waste and minimizes downtime. In order to use the AB 2094-BM02-S multi-axis servo drive properly, it is necessary and mandatory to have a Contrologix, a Compactlogix, and an Ethernet module. Once the AB 2094-BM02-S multi-axis servo drive has been programmed, it must be tested multiple times in order to ensure that it has the correct and proper configuration and to guarantee that the programming process has been achieved successfully.

Main Products

The advantage brands and series of our company are as follows:

【Honeywell】Module DCS / PLC
【Emerson / Delta V】Module

【ABB】Input Output Module
【AB】Module / Touch Screen

【GE/Fanuc】IC69 Series PLC
【Bently Nevada】3500 system
【Yokogawa】Pressure Transmitter
【Yaskawa】Servo Drive / Servo Motor

If you need detailed technical information, welcome to contact us.

More Products