Home > Products >

330901-00-14-10-02-00 Bently Nevada 3300 NSv Proximity Probe For Vibration And Position Measurements In Tight Spaces

Name: 330901-00-14-10-02-00 Bently Nevada 3300 NSv Proximity Probe For Vibration And Position Measurements In Tight Spaces
Brand: MOORE AUTOMATION LIMITED
SKU: 330901-00-14-10-02-00
Availability: InStock

Product Details:

Place of Origin:	USA
Brand Name:	Bently Nevada
Certification:	CO.CQ
Model Number:	330901-00-14-10-02-00

Detail Information

Place of Origin:

USA

Brand Name:

Bently Nevada

Certification:

CO.CQ

Model Number:

330901-00-14-10-02-00

Model Series:

3300 NSv Proximity Transducer Series

Unthreaded Length Option:

00 = 0.0 Inches

Overall Case Length Option:

14 = 1.4 Inches

Total Length Option:

10 = 1.0 Meter (approx. 3.3 Feet)

Agency Approval Option:

00 = No Regional Or Hazardous Area Approvals

Thread Type:

3/8-24 UNF-2A English Threads

Tip Diameter:

5 Mm (Optimized For Small Targets)

Highlight:

High Light

Highlight:

Bently Nevada 330901-00-14-10-02-00

3300 NSv short case proximity probe

5mm tip proximity sensor

Trading Information

Minimum Order Quantity:

Price:

inquiries

Packaging Details:

new and original with factory sealed

Delivery Time:

2-3 work days

Payment Terms:

T/T

Supply Ability:

requires

Product Description

330901-00-14-10-02-00 Bently Nevada 3300 NSv Proximity Probe

Product Overview

Engineered specifically for confined spaces and tight mounting clearances, the Bently Nevada 330901-00-14-10-02-00 3300 NSv Proximity Probe features an ultra-compact sensor head designed for precision target tracking. This system directly solves the common engineering challenge of severe cross-talk and signal distortion when monitoring small-diameter shafts or targets with restricted lateral clearance under 9.5 mm. With its specialized narrow magnetic field and fluid-resistant construction, it serves as the definitive high-fidelity solution for accurate radial vibration and axial position monitoring on fluid-film bearing machines, small pumps, and high-speed compressors operating in restricted industrial environments.

Key Features & Benefits

Overall Case Length: 1.4 Inches (14) with 0.0" Unthreaded

An ultra-short, fully threaded 1.4-inch housing specifically optimized for low-profile brackets and shallow machine casings. It prevents the sensor body from protruding awkwardly into surrounding mechanics while maintaining full thread adjustability.
Tip Diameter & Target Clearance: 5 mm (Optimized for <9.5 mm targets)

Spits a highly concentrated, narrow magnetic beam that prevents side-viewing interference. It allows you to gather stable, uncorrupted shaft vibration data inside miniature machine housings without receiving false readings from adjacent metal casing walls.
Connector Option: ClickLoc with Protector (02)

Features a gold-plated, positive-lock coaxial connection that prevents accidental disconnection from moisture, oil spray, or machine pulling forces. It stops intermittent signal dropouts that trigger false plant trips.

Engineering Guidance

"Our vibration analysis team highly recommends the Bently Nevada 330901-00-14-10-02-00 for compact journal bearings or shallow gearbox covers where standard length probes simply cannot fit. Because this 1.4-inch body leaves very little margin for error, ensure your mounting bracket is perfectly parallel to the shaft face. Since this probe operates within a tighter 30-mil linear range than standard 8mm probes, always use a digital multimeter to verify your static gap voltage matches the Proximitor's specifications before final tightening."

Frequently Asked Questions

Can I use this 1.4-inch short case probe to replace a longer 3.2-inch case 3300 NSv probe?

Yes, provided your mounting bracket can be positioned closer to the target shaft to compensate for the shorter 1.4-inch reach. Electrically, both versions use the exact same 5mm sensor tip and 1.0-meter cable configuration, delivering identical measurement performance.

What is the purpose of the connector protector included with the '02' option?

The connector protector is a transparent sleeve that mechanically locks over the coaxial joint. It seals out conductive oil mist, grime, and condensation from bridging the coaxial pin, shielding the system against high-frequency signal noise.

Can this 3300 NSv probe be paired with a standard 3300 XL 8mm extension cable?

No. To maintain proper electrical characteristics and avoid severe signal calibration errors, the 3300 NSv probe must exclusively be paired with a 3300 NSv extension cable and matched to a 3300 NSv Proximitor sensor.

Application Case Study

Deployment Site: High-Speed Micro-Turbine Generator (Munich, Germany)

Operating Conditions: Extremely tight casing envelope, high fluid-film bearing pressures, and continuous heat cycling.

Performance Record: This short 1.4-inch case 3300 NSv probe was deployed to monitor shaft vibration inside a specialized micro-turbine casing. Standard 8mm and long-case probes were physically unusable due to external spatial limitations, but this compact 1.4-inch model integrated seamlessly into the shallow bearing block, delivering error-free radial vibration data for over three years of un-interrupted operation.

Recommended Models

330104-00-08-10-02-CN	330104-00-06-10-02-00	330104-00-04-10-02-05
330104-00-08-10-02-00	330104-00-06-05-02-00	330104-00-04-10-02-00
330104-00-08-10-01-05	330104-00-05-50-02-00	330104-00-04-05-02-00
330104-00-08-10-01-00	330104-00-05-10-02-CN	330104-00-03-05-02-00
330104-00-08-05-02-05	330104-00-05-10-02-00	330103-15-23-05-02-CN
330104-00-08-05-02-00	330104-00-05-05-02-CN	330103-13-23-05-02-00
330104-00-07-90-02-00	330104-00-05-05-02-05	330103-12-25-10-02-00
330104-00-07-10-02-CN	330104-00-05-05-02-00	330103-12-25-10-01-00
330104-00-07-05-02-00	330104-00-04-50-11-00	330103-11-19-10-02-00
330104-00-06-10-02-CN	330104-00-04-10-02-CN	330103-10-20-10-02-00