200150-14-CN Bently Nevada General-purpose Accelerometer
For Measuring Machine Casing Vibration And Acceleration In Industrial Condition Monitoring Applications
Engineered with a hermetically sealed 316L stainless steel housing and a heavy-duty 3/8-24 UNF mounting stud, the 200150-14-CN accelerometer delivers precise 100 mV/g structural vibration data. It solves the critical engineering challenges of moisture ingress, chemical corrosion, and signal degradation commonly found on vibrating machine housings under harsh industrial conditions. Backed by CCC-Ex/NEPSI certified hazardous approvals, this model is the definitive choice for casing vibration and acceleration monitoring on balance-of-plant machinery like cooling pumps, fans, and motors.
Real-World Application Case Study
- Project: Balance-of-Plant (BOP) Fan and Pump Monitoring Loop
- Location: Indonesia (2025 Deployment)
- Application: This exact model was successfully deployed for a manufacturing plant in Indonesia in 2025, operating flawlessly under tropical humid conditions. Interfacing seamlessly with standard Trendmaster proTIM data collection blocks, the sensors now provide uninterrupted, noise-free casing acceleration data directly into the facility's localized System 1 diagnostic software platform.
Custom Product FAQ
Q: Can I connect the 200150-14-CN directly to a standard 3500/42M monitor rack?
A: No, the 200150 series requires a dedicated Transducer Interface Module (like the Trendmaster ProTIM or flexiTIM) to handle its specific 5V differential power configuration. Standard 3500 monitoring racks require a proxy module or a standard 24V constant-current IEPE sensor instead.
Q: What makes the "-14" mounting bolt option unique?
A: The -14 configuration provides a standard 3/8-24 UNF threaded profile with an integrated 3/4-inch hex nut shoulder. This heavy-duty structural stud configuration offers superior energy transmission from the machine casing straight to the internal sensor crystals compared to smaller M6 or 1/4-28 variations.
Q: Does this accelerometer support low-frequency machine tracking like slow rolling bearings?
A: The 200150 model rolls off below 10 Hz. For slower structural machinery applications (such as low-speed cooling tower gearboxes operating under 600 RPM), you should use its sister model, the 200155 Accelerometer, which tracks down to 2.0 Hz.
Recommended Models
| 330180-X1-CN MOD:145193-09 |
330173-08-18-10-02-00 |
330130-085-03-05 |
| 330180-X1-05 MOD:145004-66 |
330173-07-11-10-02-00 |
330130-085-01-00 |
| 330180-X1-05 MOD:145004-57 |
330173-00-06-10-02-00 |
330130-085-00-CN |
| 330180-X1-05 MOD:143945-05 |
330173-00-05-10-12-00 |
330130-085-00-05 |
| 330180-X1-05 MOD:143416-07 |
330173-00-04-10-02-00 |
330130-085-00-00 |
| 330180-X0-05 |
330173-00-03-10-02-00 |
330130-080-02-00 |
| 330180-92-05 |
330172-16-42-10-01-00 |
330130-080-01-CN |
| 330180-51-05 |
330171-08-24-10-02-00 |
330130-080-01-00 |
| 330180-51-00 |
330171-00-08-10-02-00 |
330130-080-00-CN |
| 330180-50-00 |
330130-085-13-05 |
330130-080-00-05 |
Global Distribution Network
Amikon supplies industrial automation parts to more than 150 countries, covering a wide mix of regions.
The Americas: Especially the USA and Canada, still rely quite a lot on replacement parts. Many sites there are older facilities like refineries or chemical plants.
Europe: Similar to the Americas, with countries such as Germany, UK, France and Italy. A lot of work there is about keeping existing systems running rather than new installations.
Asia-Pacific: Includes China, Japan, South Korea, Singapore and Australia. Industries there range from semiconductors to shipbuilding and mining, depending on the country.
Middle East and Africa: Like UAE, Saudi Arabia, Qatar and South Africa, are more focused on energy-related operations, mainly oil, gas and power sectors.
The Amikon Benefit
100% Original | Factory Sealed | Lowest Lead Times
Your message must be between 20-3,000 characters!
