330105-02-12-10-12-RU Bently Nevada 3300 XL 8 Mm Reverse Mount Proximity Probe For Industrial Machinery
The Bently Nevada 330105-02-12-10-12-RU is a high-precision 3300 XL 8 mm reverse-mount proximity probe. It is purpose-built for confined internal spaces where a standard probe cannot be threaded from the outside, utilizing a specialized backward-installation shell to monitor critical shaft vibration and thrust position on industrial rotating machinery.
Engineering Specification
Engineer's Note:
"When sizing up your layout for the 330105-02-12-10-12-RU, please remember that this probe features a 1.0-meter integrated cable length. Because Bently Nevada 3300 XL systems rely on strict electrical impedance matching (5-meter or 9-meter loops), this specific probe must be paired with a 4.0-meter extension cable (such as the 330130-040 variant) to complete a standard 5.0-meter transducer loop. Pairing this with a standard 4.5-meter cable will shift the calibrated scale factor away from its 200 mV/mil standard, triggering false machinery protection trips or un-calibrated radial vibration readings."
Project Application
Project Case Study:
"This exact reverse-mount configuration was selected and deployed in 2025 for a large-scale natural gas pumping station upgrade utilizing heavy centrifugal machinery. Because the clearance behind the bearing caps was strictly restricted by surrounding structural beams, external-mount probes were unfeasible. The 330105 reverse-mount design allowed secure interior installation into the housing wall. Coupled with the FluidLoc ® cable matrix, the system has run for over 18 months without a single drop of high-pressure lubrication oil escaping through the conduits, maintaining complete signal integrity across seasonal temperature swings."
Technical Questions
Q: Why does this model use PEEK tip material instead of PPS used in standard variants?
A: Polyetheretherketone (PEEK) is standard on newer 3300 XL variants, offering significantly higher chemical resistance against aggressive synthetic oils, lower moisture absorption, and excellent mechanical toughness compared to polyphenylene sulfide (PPS), making it optimal for continuous submersion.
Q: Can I use this -RU certified probe in a project site located in North America or Western Europe?
A: Mechanically and electrically, the probe will perform identically to standard global variants. However, because it carries the -RU approval suffix for local Russian/CIS regulations, it may lack the specific North American (CSA/FM) or European (ATEX) stamped labels required by your local electrical inspectors.
Q: What is the main structural difference between this reverse-mount probe and a standard probe?
A: Standard probes thread directly into a hole from the outside of the machine. Reverse-mount probes feature an inverse housing design where the probe tip is inserted through the mounting sleeve from the inside or back of the housing assembly, stopping at an integrated flange collar.
Recommended Models
| 330104-00-20-10-02-00 |
330104-00-14-10-01-05 |
330101-00-18-10-02-CN |
| 330104-00-20-10-01-CN |
330103-00-07-10-12-05 |
330101-00-18-10-02-00 |
| 330104-00-20-05-02-00 |
330103-00-07-10-02-00 |
330101-00-17-10-02-CN |
| 330104-00-18-10-02-00 |
330103-00-07-05-02-00 |
330101-00-16-10-02-00 |
| 330104-00-16-10-02-CN |
330103-00-06-15-02-CN |
330101-00-15-10-02-00 |
| 330104-00-16-10-02-00 |
330103-00-06-10-02-CN |
330101-00-12-10-02-05 |
| 330104-00-15-10-02-00 |
330101-00-28-05-02-00 |
330101-00-12-10-01-CN |
| 330104-00-15-10-01-CN |
330101-00-20-50-02-05 |
330101-00-08-20-02-05 |
| 330104-00-15-05-02-00 |
330101-00-20-10-02-05 |
330101-00-08-10-02-00 |
| 330104-00-14-10-02-05 |
330101-00-19-10-02-00 |
330101-00-08-05-02-05 |
The Amikon Benefit: 100% Original | Factory Sealed | Lowest Lead Times
Global Distribution Network
Amikon supplies industrial automation parts to more than 150 countries, covering a wide mix of regions.
The Americas: especially the USA and Canada, still rely quite a lot on replacement parts. Many sites there are older facilities like refineries or chemical plants.
Europe: similar, with countries such as Germany, UK, France and Italy. A lot of work there is about keeping existing systems running rather than new installations.
Asia-Pacific: includes China, Japan, South Korea, Singapore and Australia. Industries there range from semiconductors to shipbuilding and mining, depending on the country.
Middle East and Africa: like UAE, Saudi Arabia, Qatar and South Africa, are more focused on energy-related operations, mainly oil, gas and power sectors.
Your message must be between 20-3,000 characters!
