Engineered specifically for Zone 0 / Class I Division 1 explosive environments, the Emerson 8626-FT-IS intrinsically safe field terminal provides a dedicated, fault-tolerant field-wiring interface for PAC8000 Remote I/O systems without requiring bulky external Zener barriers. By isolating hazardous-area sensor circuits directly at the carrier and preventing mismatched module connections through mechanical keying (C3), it eliminates loop-wiring errors and compliance bottlenecks in offshore oil and gas platforms, LNG terminals, and petrochemical safety skids.
Technical Note: Per Emerson PAC8000 datasheet 00813-0100-0108, the 8626-FT-IS is officially engineered as an 8-channel Intrinsically Safe RTD Field Terminal paired with the 8206-TI-IS module. For discrete Fire & Gas switch/detector loops, verify whether your cabinet specifies the companion 8623-FT-IS terminal.
| Specification | Value / Details |
|---|---|
| Manufacturer | Emerson (PAC8000 / MTL Remote I/O Family) |
| Catalog / Part Number | 8626-FT-IS |
| Official Component Type | 8-Channel Intrinsically Safe RTD Field Terminal (Pairs with 8206-TI-IS) |
| Supported Sensor Wiring | 2-Wire, 3-Wire, and 4-Wire RTD / Resistance Circuits |
| Mechanical Key Position | C3 (Prevents incorrect module insertion) |
| Hazardous Location Rating | ATEX Zone 0 / Zone 1, IIC; UL Class I, Division 1, Groups A-D |
| Operating Temperature & Harshness | -40°C to +70°C; ISA Level G3 Corrosion Resistance; 30 g Shock / 5 g Vibration |
| Mounting & Dimensions | PAC8000 DIN-Rail Carrier; 88 mm (D) × 39.5 mm (H) × 42 mm (W) |
"Before ordering or installing the Emerson 8626-FT-IS on an oil and gas safety or process skid, double-check the exact I/O card in that carrier slot. While many procurement BOMs group PAC8000 terminals under general Fire & Gas or Hazardous Area spares, the 8626-FT-IS is mechanically keyed at C3 exclusively for the 8206-TI-IS 8-channel RTD temperature module. If your fire and gas detectors use discrete switch or 4-20 mA loops, verify whether your slot requires the 8623-FT-IS (keyed B1 for 8220-DI-IS or C4 for 8230-AI-IS) instead."
A: Yes. When mounted on an approved Emerson PAC8000 intrinsically safe carrier, the 8626-FT-IS carries ATEX and UL Class I, Division 1 approvals, allowing field sensors located in Zone 0 / Division 1 explosive gas environments to terminate directly onto the screw clamps without external barriers.
A: The 8626-FT-IS is designed exclusively for the Emerson PAC8000 8206-TI-IS 8-channel intrinsically safe RTD input module using mechanical key position C3. It cannot be mated with digital input (8220-DI-IS) or standard analog (8230-AI-IS) cards.
A: Yes. The 8626-FT-IS isolates all landed 2-, 3-, or 4-wire field cables on its removable screw-terminal block, allowing maintenance engineers to hot-swap the companion 8206-TI-IS electronic module without disconnecting field wires or re-terminating loops.
"In Q4 2025, 24 units of the Emerson 8626-FT-IS intrinsically safe field terminal were delivered to an offshore gas compression platform expansion project in the Middle East. Integrated into existing PAC8000 Zone 1 Remote I/O cabinets, the terminals enabled rapid commissioning of high-temperature process-shutdown RTD loops under strict ATEX compliance with zero field-wiring rework."
Inquiry now: miya@mvme.cn
At every stage of our operations, we ensure that exceptional service is at the heart of what we do. We also invest significantly in attracting top global talent and securing exclusive technologies, enabling us to provide even higher quality service to our customers.
We are committed to continuous innovation and to raising the global standard for automation parts supply. Regardless of a customer's location or the difficulty in sourcing parts, our goal is to connect clients worldwide through our extensive inventory. Our broad range of offerings ensures that we can deliver a wide variety of parts to customers across the globe.
Ready to elevate your automation system? Contact us today for more information or to make a purchase.
Miya Zheng
Scan the QR code above to contact us.