ABB Module 07MK92 GATS110098R0161 ABB 07MK92 ARCNET PROFIBUS DP New 2016 Sealed

ABB Module 07MK92 GATS110098R0161 ABB 07MK92 ARCNET PROFIBUS DP New 2016 Sealed

Product Description:

The Ethernet coupler is an intelligent 100-Base-T-Ethernet communication interface based on the highly integrated microcontroller EC1. The coupler supports the complete TCP/IP protocol and the application layers, too. The user interface is based on a dual-port memory. The coupler meets the PC/104 standard. It is powered by the internal 5 V supply voltage.The Ethernet communication is run via an RJ45 interface.
In addition, the coupler has a diagnosis interface in Mini-DIN format.The coupler is configured via the dual-port memory, the diagnosis interface or a TCP/IP connection by means of a system configurator. The configuration is saved nonvolatile in a Flash EPROM.

Related Product Recommendation:

Product's Character:

The condition of the PROFIBUS coupler is indicated with
the 4 status LEDs.
After power ON the coupler initializes a self-test. If this
test was successful, the yellow READY LED goes ON.
Otherwise the LED starts flashing and aborts the further
initialization. If the LED remains OFF, the coupler is defective.
In the course of initialization, the RUN LED is OFF for the
first time. The LED is only activated after configuration
data has been sent to the coupler and the operating mode
of the coupler was set. If the operating system of the coupler
detects a parameterization or a configuration error,
the green RUN LED flashes non-cyclically. If this LED
flashes cyclically, the coupler is ready for communication,
but the communication is not active yet. In case of an
active communication, the RUN LED lights continuously.
The red ERROR LED indicates errors on the PROFIBUS
interface.

The use of the product: