ABB Module 086363-002 OSPS2 ABB 086363002 OPTIPAK PCB CIRCUIT BOARD effective service

ABB Module 086363-002 OSPS2 ABB 086363002 OPTIPAK PCB CIRCUIT BOARD effective service

Product Description:

Programming is performed using AC31 programming software, which can be run on commercially available IBM compatible PCs (see documentation for the programming system 907 PC 331)The processor processes the user program contained in the RAM. It is loaded into the RAM via the serial interface COM1/COM2 or via the SmartMedia Card and can also be changed there. An additional save command is used to save the program in the Flash EPROM. Note: In the course of the following operationsPower ’ON’RUN/STOP switch from STOP --> RUN Program start-up with programming system
Cold start of the PLCWarm start of the PLC the RAM is overwritten by the contents of the Flash EPROM, if a user program is contained in the Flash EPROM.

Related Product Recommendation:

Product's Character:

Initialization of data areas During program start, that data areas are initialized to 0 partly or completely, that are defined by system constants,see chapter B7 (Appendix), System constants. If no battery is effective or if the system constants are in their default values (factory settings), all of the above mentioned data areas are completely set to 0 after power OFF/ON. Reactions on errors of error class 3 The user can configure whether or not the user program is to be aborted automatically, if an class 3 error occurs, see chapter B7 (Appendix), System constants.Starting-up the AC31 system after power ONThe user can enter a number of n remote modules in KW 00,09. The user program starts only, i.e. it handles process inputs and outputs only, if at least n remote modules have been adopted into the CS31 system

The use of the product: