ABB Module CI522A 3BSE018283R1 ABB CI522A COMMUNICATION INTERFACE BUNDLE WITH NEW in sealed box

ABB Module CI522A 3BSE018283R1 ABB CI522A COMMUNICATION INTERFACE BUNDLE WITH NEW in sealed box

Product Description:

Acknowledging outputs after a short-circuit When an overload or short-circuit occurs, the output limits
the current and thermically switches it off. The LED of the overloaded output is flashing.After the overload or short-circuit is corrected, the outputs are switched on again automatically. A manual acknowledgement
or one initiated by the user program is not necessary.The error message has to be acknowledged.I/O configuration Module 07 DC 92 does not store configuration data. The 32 configurable channels are defined by the user program as inputs or outputs, which means that through reading and writing data in the user program, each configurable input/output channel can be used as input, output, or rereadable
output.

Related Product Recommendation:

Product's Character:

The procedure is repeated for the other input and output channels with each successive pressing and releasing of the test button.After accessing the last channel, another pressing of the test botton initiates an LED test. All LEDs must light up.Following that, the position of the address switch is displayed
by LEDs 00 to 07 for about 3 seconds which was set by module 07 DC 92 during the initialization. In this
case LED 00 shows the setting of switch 1 (LEDs 0...7 are assigned to switches 1...8 ).
The error messages at the I/O module and at the central control unit go out as soon as the errors have been corrected,no new errors exist and the error correction has been acknowledged.
 

The use of the product: