ABB Module CMA132 3DDE300412 ABB CMA132 TERMINAL BOARD Excellent Working Condition

ABB Module CMA132 3DDE300412 ABB CMA132 TERMINAL BOARD Excellent Working Condition

Product Description:

Activate new operating mode by  calling up the menu item of ”Enable PLC mode”in the ABB programming and test system or performing a warm start performing a cold start or power OFF/ON.Setting the cycle time Processing times Addressing when remote modules are connected Addressing Back-up of data areas Back-up of data areas, i.e. saving of data during power OFF/ON, is only feasible with built-in battery. The following data can be backed, completely or partly:Binary flags Word flags Double word flags
Step chains Historical values In order to back-up certain data, they have to be excluded from initialization to 0. Initialization of data areasDuring program start, that data areas are initialized to 0 partly or completely, that are defined by system constants, see chapter B7 (Appendix), System constants.
If no battery is effective or if the system constants are in their default values (factory settings), all of the above mentioned data areas are completely set to 0 after power OFF/ON.

Related Product Recommendation:

Product's Character:

The following has to be observed for project planning and start-up:Programming
is performed using AC31 programming software, which can be run on commercially available IBM compatible PCs (see documentation for the programming system 907 PC 331)The processor processes the user program contained in the RAM. It is loaded into the RAM via the serial interface COM1/COM2 or via the SmartMedia Card and can also be changed there. An additional save command is used to save the program in the Flash EPROM.Note: In the course of the following operations Power ’ON’  RUN/STOP switch from STOP --> RUN  Program start-up with programming system Cold start of the PLC Warm start of the PLC
 

The use of the product: