ABB Module DSTD132 5716001-FX ABB DSTD132 5716001-FX DSTD 132 CONNECTION UNIT BOARD effective service

ABB Module DSTD132 5716001-FX ABB DSTD132 5716001-FX DSTD 132 CONNECTION UNIT BOARD effective service

Product Description:

The SmartMedia Card is inserted with the contact field visible (see the figure obove). A SmartMedia Card, once initialized as user data memory, can no more be used as a user program card (for
initialization see "Operating and test functions", volumeThe SmartMedia Card must be protected from mechanical stress (e.g. do not bend) electrostatic discharge contact pollution (do not touch the contacts)Access Access to the SmartMedia Card is possible via the programming interface with the aid of the operating and test functions, see volume 7.3, chapter 2.4, commands FCINIT, FCWR, FCRD, FCDEL, SP.Access within the PLC program is possible with CEs, see the documentation of the programming software, the CEs are FCWR, FCRD, FCDEL.

Related Product Recommendation:

Product's Character:

In order to safe the user program in the SmartMedia Card(SMC Card), a brand new SMC Card is required or another one which has never been initialized as a user data memory. Sequence of program saving Load PLC user program into the PLC (RAM) While power is ON, insert the SMC Card
Activate monitor command "SP".The user program is now copied from the PLC's RAM to its Flash EPROM and then loaded into the SMC Card. An update of the 07 KT 94's operating system (firmware)
is not possible with the SMC Card.The high-speed counter used in the basic unit 07 KT 94
works independently of the user program and is therefore able to response quickly to external signals. It can be used in seven different and configurable operating modes. The desired operating mode is set in the system constant KW 85,02 (described later). The configured operating mode is only activated during initialization (power-on, cold start, warm start). For all operating modes, the same function block COUNTW is used.

The use of the product: