ABB Module PM510 3BSE000270R1 ABB PM510 3BSE000270-R1 POWER SUPPLY MODULE superior quality product
Product Description:
When resistance thermometers are used, a constant current must flow through the measuring resistor in order to create the necessary voltage drop for the evaluation. For this purpose, the basic unit 07 KT 94 provides a constant current sink, which is multiplexed to the 8 analog channels. The following figure shows the connection of Pt100 resistance thermometers in 2-wire configuration.Measuring ranges and with Pt100 as temperature sensor in 3-wire configuration The following figure shows the connection of Pt100 resistance thermometers in 3-wire configuration.The 07 KT 94 unit linearizes the Pt100 characteristic.Temperatures that exceed the measuring range cause the overflow numerical value of +32767. If the measured value is below the range, the underflow numerical value of -32767 is set. In case of a detected open-circuit the numerical value of +32767 is set. If the sensor is short-circuited, the numerical value of -32767 is set.
Related Product Recommendation:
| DAI01 |
DSTA131 |
DSQC668 3HAC029157-001 |
| DAI04 |
DSMC110 57330001-N |
DSQC679 3HAC028357 001 |
| DAI05 |
DSPC155 57310001-CX |
DSQC679 3HAC028357001 |
| DAO01 |
DSPC172H 57310001-MP |
DSQC697 3HAC037084-001 |
| DCO01 |
DSQC 352A |
DSSB146 48980001-AP/1 DSSB146*BAT2C |
| DCP02 |
DSQC 539 3HAC14265-1 |
DSSR122 48990001-NK |
| DCP10 |
DSQC 633A 3HAC031851-001 |
DSSR170 48990001-PC |
| DDI01 |
DSQC104 6369901-104 |
DSTA131 57120001-CV |
| DDO01 |
DSQC201 YB560103-AB |
DSTA131 57120001-CV |
| DDO02 |
DSQC205 YB560103-AD/1 |
DSTA160 57120001-AH |
| DDO03 |
DSQC223 YB560103-BD |
DSTA180 57120001-ET |
| DFC01 |
DSQC227 YB560103-BK |
DSTC170 57520001-BK |
| DFE01 |
DSQC236G YB560103-CD |
DSTC190 57520001-ER |
| DSQC345B 3HAB8101-2 |
DSQC236T YB560103-CE |
DSTC454 5751017-F |
| DSQC346G 3HAB8101-8 |
DSQC239 YB560103-CH |
3ASC25H705/7 |
| DSQC354 3HNE00065-1 |
DSQC325 3HAB2241-1 |
3ASU21C110 LU6278 DCU30/7 |
| DSQC363 3HAC1462-1 |
DSQC328A 3HAC17970-1 |
3AUA489002B4562 |
| DSQC373 3HAC3180-1 |
DSQC332 3HAB9669-1 |
3BHE022291R0101 PCD230A |
| DSQC377B 3HNE01586-1 |
DSQC334 3HAB5845-1 |
3BHE023784R2530 |
| DSQC406 3HAC035301-001 |
DSAI130 |
3BHE024577R0101 PP C907 BE |
| DSQC500 3HAC3616-1 |
SNSR-104 |
3BSE001245R1 3BSC640008R1 |
| DSQC503 3HAC18159-1/03 |
YPQ201A |
3BSE003879R1 |
| DSQC541 3HAC14363-01 |
DSMB175 |
3BSE011316R1 SDCS-PIN-52 |
| DSQC604 3HAC12928-1 |
YPK107E |
3HAC14550-4 |
| DSQC604 3HAC12928-1 |
YPQ202A |
3HAC14551-2 |
| DSQC608 3HAC12934-1 |
DCU30/7 |
3HAC17484-8 |
| DSQC609 3HAC14178-1 |
DSAV-111 |
3HAC17484-9 |
Product's Character:
In order to avoid measurement errors, it is absolutely necessary, to lead the cores to the Pt100 sensors in the same cable. The cores must have the same cross section. Per channel, a twisted pair is used (for the two terminals of the Pt100 sensors) plus a single core (half of a twisted pair) for the connection to AGND1. Depending on the configured operating mode, the measured value is assigned linearly as follows the return wire AGND1. In the operating mode "Pt100 in 3-wire configuration" two adjacent analog inputs belong together (e.g. EW 6,00 and EW 6,01). For configuration, both inputs must be configured to the desired operating mode, see configuration table Fig. The constant current of the one channel flows through the Pt100 resistance sensor, the constant current of the other channel through one of the wires.
The basic unit 07 KT 94 calculates the measuring value from the two voltage drops and stores it under the odd address
DCS800-S01-1500-07 Module Drive ABB
DCS800-S01-2050-05 Module Drive ABB
DCS800-S01-2050-06 Module Drive ABB
DCS800-S02-0025-05 Module Drive ABB
DCS800-S02-0050-05 Module Drive ABB
DCS800-S02-0075-05 Module Drive ABB
DCS800-S02-0100-05 Module Drive ABB
DCS800-S02-0140-05 Module Drive ABB
DCS800-S02-0200-05 Module Drive ABB
DCS800-S02-0260-05 Module Drive ABB
DCS800-S02-0290-06 Module Drive ABB
DCS800-S02-0290-07 Module Drive ABB
DCS800-S02-0350-05 Module Drive ABB
DCS800-S02-0450-05 Module Drive ABB
DCS800-S02-0520-05 Module Drive ABB
DCS800-S02-0900-06 Module Drive ABB
DCS800-S02-0900-07 Module Drive ABB
DCS800-S02-1500-06 Module Drive ABB
DCS800-S02-2000-06 Module Drive ABB
DCS800-S02-2000-07 Module Drive ABB
DD 370A GJR2237400R0001, GJR2237400R1 DD370A Diode Module ABB
DD 371a HEIE 420334 R1 DD 371a Module ABB
DDI 01 P 3711-4-0369626 DDI 01 Digital Input Module ABB
DDI 02 0369637M DDI 02 Digital Input Module ABB
DDI 03 0369643M DDI 03 Digital Input Module ABB
DDI 04 0369643M DDI 03 Digital Input Module ABB
DDO 01 P 37151-4-0369627 DDO 01 Digital Ouput Module ABB
DDO 02 P37151-4-0369642 DDO 02 Digital Ouput Module ABB
The use of the product:
1.combustion control systems,
2.non-ferrous metal smelting.
3.construction machinery,
Product's advantages:
1365 days warranty for all the goods from us.
22000+ suppliers with us, we could help you to get any components which is difficult to get.
3.isk-free guarantee, 60 days refund. If the item you purchase from our store are not of perfected quality, simply return them to us for replacement or refund.
Our advantages:
1.open architecture to take advantage of traditional or renewable sources of energy!
2.We keep more than 10 thousands Transistors in warehouse, it could cut lead time of most items.
3.Customer service in 1-4 hours. If there's any question, please contact with our sales.
Frequently Asked Questions:
1.Q:How about the payment terms ?
A:We frequently use T/T
2.Q:What about your shipping terms ?
A: We can ship by DHL,UPS,FEDEX,ARAMAX,TNT,and so on
3.Q:What about your lead time ?
A: We have many itmes in stock , 3-5 days you will receive it .
Send your Inquiry details in the Below, Click "Send" Now!
Contact Information:
Contact:Miya ( manager)
Email :sales@mooreplc.com
Q Q: 2851195450
Skype: miyazheng520
Mobile:86-18020776792 ( what's app )
Your message must be between 20-3,000 characters!
