ABB Module SNAT603CNT SNAT 603 CNT ABB SNAT603CNT CIRCUIT BOARD machinery

Product Description

ABB Module SNAT603CNT SNAT 603 CNT ABB SNAT603CNT CIRCUIT BOARD machinery

Product Description:

The technical specifications of the inputs are the same with the other digital inputs, but with the following
exception: Caused by the direct electrical connection with the output, the varistor for demagnetization of inductive loads (see figure above) is also in effect at the input. Therefore, the voltage difference between UP5 and the input signal must not be greater than the limit voltage of the varistor.The limit voltage of the varistor is ca. 36 V. This means,that if UP5 = 24 V, the input signal voltage must be between -12 V and +30 V. If UP5 = 30 V, the input voltage has to be within -6 V and +30 V.If all of the 8 channels of the group are used as inputs,and if in addition the UP5 terminal is left unconnected, no restrictions exist for the inputs. The input signal voltages then may be within -30 V and +30 V. There is no restriction for the input/output group concerning its safety against reversed polarity

Related Product Recommendation:

Product's Character:

The 8 digital inputs/outputs are arranged in one group.The group as a whole is electrically isolated from the rest of the device.The inputs/outputs can be used individually as input, output or re-readable output.If the terminals are used as digital inputs, the input signal delay can be configured to 7 ms (default) or to 1 ms (see "System technology"). If the terminals are used as digital outputs, the output
signals "1" are individually monitored by the re-readable input. If the output status is wrong, an overall error message is generated for the involved output group.The error is displayed by the red LED Ovl. and by error flags of the PLC then. The error could have been caused by overload, short-circuit or missing supply voltage UP5/ZP5. The technical specifications of the outputs are the same as with the other digital outputs.

DSBBN001-0 Back Plane ABB
DSBBN002-0 Back Plane ABB
DSBC110 57310256-E/1 DSBC 110 Bus Termination Module ABB
DSBC111 57310256-K/1 DSBC 111 Bus Module ABB
DSBC170 57310256-DB Bus Module ABB

DSBC172 57310001-KD/5, 57310001-KD DSBC172 Bus Repeater Module ABB
DSBC172N 3BNP000467R1 Repeater Module ABB
DSBC173 57310001-KH DSBC 173 Bus Extender S100 I/O Bus ABB
DSBC173A 3BSE005883R1 Bus Extender S100 I/O Bus ABB
DSBC173N 3BNP000468R1 Repeater Module ABB
DSBC174 3BSE012211R1 DSBC 174 Bus Extender Module - S100 I/O Bus ABB
DSBC176 3BSE019216R1 Bus Extender Board ABB
DSBSN001 Digital Output Board ABB
DSCA114 57510001-AA DSCA 114 Communication Board ABB
DSCA124 57520001-BU Communications Module ABB
DSCA125A 57520001-CY Communications Board ABB
DSCA130 57510001-AT DSCA 130 MB200 Communication Board ABB
DSCA170 57310256-DB / 4 Communications Board ABB
DSCA180B 57520001-G2 Communications Module ABB
DSCA190V 57310001-PK DSCA 190V Communications Module ABB
DSCA310 57520001-AH/1 Communications Board ABB
DSCA325 57520001 Communications Board ABB
DSCI112 Communication Module for Master 215 ABB
DSCL110 57310001-HD DSCL 110 Redundancy Control Unit ABB
DSCL110A 57310001-KY DSCL 110A Redundancy Control Unit ABB
DSCS115 57520001-AD/4 Communications Board ABB
DSCS116 5752 0001-BZ Communication Module ABB
DSCS117 57520001-CN / 9 Communications Board ABB
DSCS130 Remote I/O Controller Module ABB
DSCS131 57310001-LM Communications Module ABB
DSCS140 57520001-EV MasterBus 300 Communication Module ABB
DSCS150 DSCS141 DSCS 150 Communication Module ABB
DSDI 110 57160001-A/13,57160001-A Digital Input Module ABB
DSDI 110A 57160001-AAA/2 DSDI110A Digital Input Module ABB
DSDI 110N 3BSE018525R1 Digital Input Module ABB

The use of the product: