ABB Module SNAT617CHC SNAT 617 CHC ABB SNAT617CHC BROWN BOVERI New and original

ABB Module SNAT617CHC SNAT 617 CHC ABB SNAT617CHC BROWN BOVERI New and original

Product Description:

Input currents which exceed the measuring range cause an overflow error message. If the measured value is below the range, an underflow error message is generated. The input impedance is ca. 330 W. The current input has a self-protecting mechanism. If the input current gets too high, the shunt is switched off and the value for range overflow is generated. About every second, the unit tries
to switch on the shunt again. In this way the correct measurement will succeed after the current has reached a normal value again. The trigger of the self-protecting mechanism is displayed by the red LED Ovl. as long as the overload is present. In the PLC system an error message is then stored (FK4,
error number 4). The open-circuit monitoring begins below ca. 3 mA. The value of the range underflow is stored. If the open-circuit monitoring is configured, the open-circuit event is displayed by the red LED Ovl. as long as it is present. In the PLC system an error message is stored

Related Product Recommendation:

Product's Character:

The 8 digital inputs/outputs are arranged in one group.The group as a whole is electrically isolated from the rest of the device.The inputs/outputs can be used individually as input, output or re-readable output.If the terminals are used as digital inputs, the input signal delay can be configured to 7 ms (default) or to 1 ms (see "System technology"). If the terminals are used as digital outputs, the output
signals "1" are individually monitored by the re-readable input. If the output status is wrong, an overall error message is generated for the involved output group.The error is displayed by the red LED Ovl. and by error flags of the PLC then. The error could have been caused by overload, short-circuit or missing supply voltage UP5/ZP5. The technical specifications of the outputs are the same as with the other digital outputs.

DC 371a GJR2 237100 R1, GJR2237100R0001 DC 371a Group Control Module ABB
DC 372a GRJ2 238200R1 , GRJ2238200R0001 Step Control Module ABB
DC 375a GJR2 304400 R1, GJR2304400R0001 DC375a Operating Mode Controller Module ABB
DC 722F A0 3BDH000372R0001 Digital Input/Output Module ABB
DCO 01 0369666 DCO01 Serial Interface Module ABB
DCP 02 P 37211-4-0369654 DCP 02 CPU Module ABB
DCP 10 P37211-4-0338701 DCP10 CPU Module ABB
DCS800-DEMOCASE Field Kit ABB
DCS800-EP1-0020-05 Module Drive ABB
DCS800-EP1-0045-05 Module Drive ABB
DCS800-EP1-0065-05 Module Drive ABB
DCS800-EP1-0090-05 Module Drive ABB
DCS800-EP1-0125-05 Module Drive ABB
DCS800-EP1-0180-05 Module Drive ABB
DCS800-EP1-0230-05 Module Drive ABB
DCS800-EP1-0315-05 Module Drive ABB
DCS800-EP1-0405-05 Module Drive ABB
DCS800-EP1-0470-05 Module Drive ABB
DCS800-EP1-0610-05 Module Drive ABB
DCS800-EP2-0020-05 Module Drive ABB
DCS800-EP2-0045-05 Module Drive ABB
DCS800-EP2-0065-05 DCS800-EP2-0065-05 ABB
DCS800-EP2-0090-05 Module Drive ABB
DCS800-EP2-0125-05 Module Drive ABB

DCS800-EP2-0180-05 Module Drive ABB
DCS800-EP2-0230-05 Module Drive ABB
DCS800-EP2-0315-05 Module Drive ABB
DCS800-EP2-0405-05 Module Drive ABB
DCS800-EP2-0470-05 Module Drive ABB
DCS800-EP2-0610-05 Module Drive ABB
DCS800-PAN Field Kit ABB
DCS800-S01-0020-05 Module Drive ABB
DCS800-S01-0045-05 Module Drive ABB
DCS800-S01-0065-05 Module Drive ABB
DCS800-S01-0090-05 Module Drive ABB
DCS800-S01-0125-05 Module Drive ABB
DCS800-S01-0180-05 Module Drive ABB
DCS800-S01-0230-05 Module Drive ABB
DCS800-S01-0290-06 Module Drive ABB

The use of the product: