ABB Module DSDO115 57160001-AK ABB DSDO115 57160001AK Used DSDO115 NEW in sealed box

ABB Module DSDO115 57160001-AK ABB DSDO115 57160001AK Used DSDO115 NEW in sealed box

Product Description:

IResolution in the PLC system: The measured values are converted with a resolution of
12 bits, i.e. 11 bits plus sign for voltage and 12 bits without sign for current. The ranges 0...5 V und ±5 V are converted with 10 bits plus sign.the output A 62,00 is only available for the counter. If the output is to use as a normal digital output, it has to Further details can be found in volume 2, chapter 5.1 "General
information for the use of analog inputs and outputs". In order to make sure, that unused input channels have a defined 0V level, they may be shorted to AGND. Unused inputs must be configured with "unused".
The relationship between the analog input signals and the converted numbers is illustrated in the following figures. be made sure, that the high-speed counter is not configured to the operating modes 1 or 2 (see also the chapter "High-speed counter").Features of the analog inputs:The 8 analog inputs are not electrically isolated.The resolution of the A/D converter is 12 bits. Analog signals are conducted in shielded cables (seeThe analog inputs can be configured individually in a lot of different operating modes (even as digital inputs). The configuration is performed by setting certain bits in the system constants KW 86,00 to KW 86,07 as follows

Related Product Recommendation:

Product's Character:

If the open-circuit or short-circuit monitoring is configured, the detected error is displayed by the red LED Ovl as long as it is present. In the PLC system an error message is stored (FK4, error number 9).
In order to avoid error messages with unused analog inputs, it is useful, not to configure this channels for Pt100. Connection of Pt100 temperature sensors in 3-wire configuration If the sensors are located close together, only one core is needed as
the return wire AGND1. In the operating mode "Pt100 in 3-wire configuration" two adjacent analog inputs belong together (e.g. EW 6,00 and EW 6,01). For configuration, both inputs must be configured to the
desired operating mode, see configuration table Fig. The constant current of the one channel flows through the Pt100 resistance sensor, the constant current of the other channel through one of the wires.
The basic unit 07 KT 94 calculates the measuring value from the two voltage drops and stores it under the odd address

GJR5250000R0202 07KR91, 07KR91D, 07KR91B Central Processing Unit -120/230 Vac ABB
GJR5250000R0252 07 KR 91 07KR91 Central Processing Unit-24 VDC ABB
GJR5250000R0303 07KR91 Advant Controller 31 ABB
GJR5250000R0353 07KR91B 07KR91 Basic Unit ABB

GJR5250200R1 07SK90R1, GJR 525 0200 R0001 07SK90R1 Programming Cable - 5 meters ABB
GJR5250500R0101 07KT92 Central Unit - 90 Series ABB
GJR5250500R0202 07KT92, 07KT92 D, 07KT92C 07KT92 Central Processing Unit ABB
GJR5250500R0262 07KT92 07KT92 Central Processing Unit - 90 Series ABB
GJR5250500R0902 07 KT 92 07KT92 Central Processing Unit ABB
GJR5250500R5101 23KT92, RTU510 RTU510 23KT92 Unit ABB
GJR5250800R0202 07 DO 90-S Digital Output Unit ABB
GJR5250900R0202 07 DI 90-S 07DI90-S Digital Input Module ABB
GJR5251000R0101 07 KP 90 Communications Module ABB
GJR5251000R0202 07KP90 07KP90 RCOM Communication Module ABB
GJR5251000R0303 07KP90 07 KP 90 RCOM Communications Module ABB
GJR5251063P1 Module Connector ABB
GJR5251200R0202 07AI90-S Analog Input Module ABB
GJR5251300R0101 07KT93 07 KT 93 Central Processing Unit - 90 Series ABB
GJR5251300R0161 07KT93 07KT93 Central Unit - 90 Series ABB
GJR5251300R0171 07KT93,07KT93G 07KT93 Central Processing Unit ABB
GJR5251300R2171 07KT93-S 07 KT 93-S Central Processing Unit - 90 Series ABB
GJR5251400R0101 ICDG32L1 ICDG 32 L1 Input/Output Unit ABB
GJR5251400R0202 07DC91 Advant Controller 31 I/O Unit ABB
GJR5251400R3202 07DC91 Advant Controller 31 I/O Unit ABB
GJR5251500R101 07KP92 07 KP 92 Coupler Module ABB
GJR5251500R1101 07MK92 07KP92 AC31 S90 Communication Processor (07MK92) ABB
GJR5251500R1161 07KP92E1 Communication Processor Module ABB
GJR5251600R0202 07AI91 Analog Input Unit ABB
GJR5251666R1001 ICDT08B5 Analog Input Module ABB
GJR5251700R0101 07KP94 Master Field Bus Communication Module ABB
GJR5252000R0101 07KP95 Coupler for Advant Fieldbus AF 100 Network ABB

The use of the product: