Allen Bradley Modules 1336F-BRF200-AA-EN 1336F BRF200 AA EN AB 1336F BRF200 AA EN DRIVE AC New Sealed

Allen Bradley Modules 1336F-BRF200-AA-EN 1336F BRF200 AA EN AB 1336F BRF200 AA EN DRIVE AC New Sealed

Product Description:

Bulletin 1305 drive parameter data can be programmed and displayed using PLC’s, SLC’s or other logic controllers using an optional Bulletin 1203 Communication Module. The amount of information that can be transferred between the drive and controller is determined by the DIP switch settings on theCommunication Module. Table B.1 illustrates the dip switch settings for Bulletin 1203-GD1 (Remote I/O) communication modules. Dip switch settings for other communication modules will be similar. Refer
to the appropriate communication module user manual for details.Important: 1305 drives with firmware revisions FRN1.01 and FRN1.02 are not compatible with Bulletin 1203 Communication Modules. If connected, an error message will be indicated. The red fault status and amber SCANport status LED’s on the front of the module will flash simultaneously.

Related Product Recommendation:

Product's Character:

Manual, gives an overall description of the Bulletin 1305 Adjustable Frequency AC Drive (herein called “the drive”) and provides a listing of key drive options. Additionally, this chapter provides information on receiving and handling the drive. MANUAL OBJECTIVES The purpose of this manual is to provide

the user with the necessary information to install, program, start up and maintain the Bulletin 1305 drive. To assure successful installation and operation, the material presented must be thoroughly read and
understood before proceeding. Particular attention must be directed to the ATTENTION and Important statements contained within. Chapter 2 provides instructions on how to mount and wire the drive. It also describes how to operate the drive without a Human Interface Module. Read the Motor Cable Length

section on pages 2-13 – 2-16, and the contact closure inputs information in the Control Terminal Block descriptions on pages 2-19 – 2-21. Chapter 3 defines the display and control panel keys on the optional Human Interface Module. A flowchart is provided to guide the user through the key strokes of the various

menu levels.

1772-LXP Mini PLC 2/16 Processor AB
1774-MA 4 K Memory Module AB
1774-SD Remote I/O Module AB
1774-SR Remote I/O Half Scanner Module AB
1774-TB2 Interface Module AB
1775-A3 PLC-3/10 PLC-3 Chassis AB
1775-KA Communication Adapter AB
1775-L4 Main Processor Module AB
1775-MS4 Error Correcting Memory 16K Ram AB
1775-P2 Power Supply AB
1775-P3 Multi-Output Power Supply AB
1775-SR5 I/O Scanner Communications Module AB
1777-CP Terminator AB
1784-CP13 2801–N8 Video Interface Cable AB
1784-KT/B ISA/EISA Communication Module AB
1784-KTX ISA Communication Module AB
1784-PCICS PCI Bus Messaging Module AB
1784-PKTX/A PCI Network Interface Card - Series A AB
1784-PKTX/B PCI Network Interface Card - Series B AB
1785-ENET/A 96204473 Ethernet Interface Module AB
1785-KA Communication Adapter Module AB
1785-KA3 DH PLC-2 INTFC Communication Adapter Module AB
1785-L11B /11 /11 Processor Module AB
1785-L20B/C /20 /20 Processor Module - Series C AB
1785-L20B/E /20 /20 Processor Module AB

1785-L30B/A PLC -5/30 PLC -5/30 Processor - Series A AB
1785-L30B/C PLC -5/30 PLC -5/30 Processor - Series C AB
1785-L30B/D PLC -5/30 PLC -5/30 Processor - Series D AB
1785-L40B/C /40 /40 Processor Module - Series C AB
1785-L40B/D /40 /40 Processor Module - Series D AB
1785-L40B/E /40 /40Processor Module - Series E AB
1785-L40C15/E PLC -5/40 PLC -5/40 CONTROLNET Processor - Series E AB
1785-L40C15/F PLC -5/40 PLC -5/40 CONTROLNET Processor - Series F AB
1785-L60B PLC5/60 Processor Module AB
1785-L60B/C PLC -5/60 PLC -5/60 Processor - Series C AB

The use of the product: