Allen Bradley Modules 1361-NO61-2-5 1361NO6125 AB 1361-NO61-2-5 REBUILT CYLINDER superior quality product

Allen Bradley Modules 1361-NO61-2-5 1361NO6125 AB 1361-NO61-2-5 REBUILT CYLINDER superior quality product

Product Description:

The name of the tag will reflect the name you assigned the earlier. The "C" sub-group contains the contents of the configuration assembly, which is not currently used in the 1203-CN1. The "O" subgroup contains one entry for each word of output data you configured, and the "I" sub-group contains one entry for each word of input data you configured. The "O" sub-group corresponds directly to output data for a PLC-5 described on page 5-2 of the 1203-CN1 user manual (i.e., for most common configurations, word 0 is the logic command, word 1 is the speed reference, words 2 and 3 are the first pair of data links, etc.). The "I" sub-group is similar to the input data for a PLC-5, except that it is shifted by two words (i.e., word 2 is the logic status, word 3 is the speed feedback, etc.). Words 0 and 1 of the "I" sub-group represent network status data sent by the 1203-CN1 but not processed directly by the ControlLogix this point, I/O between the ControlLogix processor and the 1203- CN1 should be configured and running, and the meaning of the various I/O words should be understood. If you need further assistance in configuring I/O, please ontact technical support.

Related Product Recommendation:

Product's Character:

Appendix B provides information about the Block Transfer messages supported by

the Remote I/O communications module. In this appendix, you will read about the

following: Block transfer status word.
Setting up data files for block transfer messages.Examples of block transfer

messages. Block transfer quick reference. Important: This appendix provides

detailed examples of block transfer messages. For information about block

transfer messages, also refer to Chapter 5.Chapter 1 provides an overview of the
Remote I/O communications module (1203-GD1 module, 1203-GK1 module, and 1336-GM1

board). In this chapter, you will read about the following:Function of the

module.Features of the module. Compatible SCANport products and programmable

controllers. Parts and hardware of the module. Steps for setting up the

module.Required tools and equipment.Description of the Remote I/O Communications

Modules The Remote I/O communications module is an optional interface designed

to provide a direct, digital link between an AB programmable

controller and any one AB SCANport product. A module is required for

each product that you want to connect to Remote I/O. There are three types of

Remote I/O communications modules

1771-NIVT Analog Input Module AB
1771-NOC Analog Output Module AB
1771-NOV Analog Output Module AB
1771-NOV A High Resolution Isolated Analog Module AB
1771-NR Analog Input Module AB
1771-NT1 Analog Input Module AB
1771-NT2 Analog Input Module AB
1771-OA Digital Output Module AB
1771-OAD AC Output Module AB
1771-OAN Digital Output Module AB
1771-OBD Digital Output Module AB

1771-OBN Digital Output Module AB
1771-OC Digital Output Module AB
1771-OD Digital Output Module AB
1771-OD16 Digital Output Module AB
1771-ODC Digital Output Module AB
1771-ODD Digital Output Module AB
1771-ODZ Digital Output Module AB
1771-OFE1 960578 Analog Output Module AB
1771-OFE2 Analog Output Module AB
1771-OFE3 Analog Output Module AB
1771-OG TTL Output Module AB
1771-OGD TTL Output Module AB
1771-OM Digital Output Module AB
1771-OMD AC Output Module AB
1771-ON Digital Output Module AB
1771-OP Digital Output Module AB
1771-OQ Digital Output Module AB
1771-OQ16 1771-OQ16 A Digital Output Module AB
1771-OR Digital Output Module AB
1771-OVN Digital Output Module AB
1771-OW Selectable Contact Module AB

The use of the product: