Allen Bradley Modules 1746-HS 1746HS AB 1746HS IMC Motion Control Module Highest version

Allen Bradley Modules 1746-HS 1746HS AB 1746HS IMC Motion Control Module Highest version

Product Description:

Advanced multi-processor design for leading-edge velocity loop bandwidth, fully digital current, velocity, and position loopsLarge-scale integration with custom ASICs and IPMs for performance and reliabilityA 16-bit A/D convertor for precise velocity command input Flash memory for simple field upgrades A personality module to store setup parameters and simplify drive replacement Reduced component count for reliability Internally-shielded filters for electromagnetic compatibility (EMC) Four dedicated I/O plus eight user-selectable, optically isolated digital inputs and outputs (sourcing/active high):Two dedicated inputs Two dedicated outputs Four user-selectable inputs Four user-selectable outputs Two analog inputs for external current limit Two analog outputs for variable monitoring or torque sharing The purpose of this manual is to provide the user with the necessary information to install, program, start up and maintain the Bulletin 1305 drive. To assure successful installation and operation, the material presented must be thoroughly read and understood before proceeding. Particular attention must be directed to the ATTENTION and Important statements contained within.

Related Product Recommendation:

Product's Character:

When the drive mounted HIM is supplied, it will be connected as Adapter 1 (see Adapter in Chapter 2) and visible from the front of the drive. The HIM can be divided into two sections; Display Panel and Control Panel. The Display Panel provides a means of programming the drive and viewing the various
operating parameters. The Control Panel allows different drive functions to be controlled. Refer to Figure and the sections that follow for a description of the panels.Important: The operation of some HIM functions will depend upon drive parameter settings. The default parameter values allow full HIM
functionality.HIM OPERATION When power is first applied to the drive, the HIM will cycle through a series of displays. These displays will show drive name, HIM ID number and communication status. Upon
completion, the Status Display will be shown. This display shows the current status of the drive (i.e. “Stopped,”“Running,” etc.) or any faults that may be present (“Serial Fault,” etc.). If the HIM software is Series A version3.00

1747-L532/C SLC 5/03 SLC 5/03 Control Processor AB
1747-L532/D SLC 5/03 SLC 5/03 Control Processor AB
1747-L532/E SLC 5/03 SLC 5/03 Control Processor AB
1747-L541/B SLC 5/04 SLC 5/04 Processor - Series B AB
1747-L541/C SLC 5/04 SLC 5/04 Processor - Series C AB
1747-L542/A SLC 5/04 1747-L542 Processor - Series A AB
1747-L542/B SLC 5/04 1747-L542 Processor - Series B AB
1747-L542/C SLC 5/04 1747-L542 Processor - Series C AB
1747-L543/B SLC 5/04 Processor - Series B AB
1747-L543/C SLC 5/04 Processor - Series C AB
1747-L551/A SLC 5/05 SLC 5/05 Controller AB
1747-L551/B SLC 5/05 SLC 5/05 Controller AB
1747-L551/C SLC 5/05 SLC 5/05 Controller AB
1747-L552/A SLC 5/05 1747-L552 Processor - Series A AB
1747-L552/B SLC 5/05 1747-L552 Processor - Series B AB
1747-L552/C SLC 5/05 1747-L552 Processor - Series C AB
1747-L553/A SLC 5/05 Controller AB
1747-L553/B SLC 5/05 Controller AB
1747-L553/C SLC 5/05 Controller AB
1747-M1 1 K EEPROM Memory Module AB
1747-M11 Flash Memory Module - 32K AB
1747-M12 Flash Memory Module - 64K AB
1747-M13 64 K Flash EPROM Memory Module AB
1747-M15 Adapter Socket AB
1747-M2 4 K EEPROM Memory Module AB
1747-M5 Adapter Socket AB

1747-NP1 Wall Mount Power Supply AB
1747-OCKTX Open Controller - Communication Interface Module

The use of the product: