Allen Bradley Modules 1756-OA8E 1756OA8E ControlLogix AC Fused Output New and original

Allen Bradley Modules 1756-OA8E 1756OA8E ControlLogix AC Fused Output New and original

Product Description:

All drives come equipped with a fault LED. When the fault LED is illuminated it is an indication a fault condition exists. Refer to page 2-3 for the location of the fault LED. Once the fault is properly cleared the LED will return to an off state. Diagnostics As can be seen in Figure 2.3, there are two indicators
provided to display the drive’s status condition. The DC Bus Charge Indicator is a neon bulb that will be illuminated when power is applied to the drive. The Fault Indicator is an LED that will be illuminated if a drive fault condition exists. Refer to details on How To Clear a Fault, below.How To Clear a Fault Important: Resetting a fault will not correct the cause of the fault condition. Corrective action must be taken prior to resetting the fault. To clear a fault perform one of the following:Cycle power to the drive. Cycle the stop signal to the drive. Cycle the [Clear Fault] parameter.

Related Product Recommendation:

Product's Character:

The name of the tag will reflect the name you assigned the earlier. The "C" sub-group contains the contents of the configuration assembly, which is not currently used in the 1203-CN1. The "O" subgroup contains one entry for each word of output data you configured, and the "I" sub-group contains one entry for each word of input data you configured. The "O" sub-group corresponds directly to output data for a PLC-5 described on page 5-2 of the 1203-CN1 user manual (i.e., for most common configurations, word 0 is the logic command, word 1 is the speed reference, words 2 and 3 are the first pair of data links, etc.). The "I" sub-group is similar to the input data for a PLC-5, except that it is shifted by two words (i.e., word 2 is the logic status, word 3 is the speed feedback, etc.). Words 0 and 1 of the "I" sub-group represent network status data sent by the 1203-CN1 but not processed directly by the ControlLogix processor. At this point, I/O between the ControlLogix processor and the 1203-CN1 should be configured and running, and the meaning of the various I/O words should be understood. If you need further assistance in configuring I/O, please contact technical support.

1769-OB16 Digital Output Module AB
1769-OF2 Analog Current/ Voltage Output AB
1770-P1 Power Supply AB
1770-SC Station Connector AB
1770XYC AB PLC 5 Battery AB
1771-0B Digital Output Module AB
1771-A2B Allen Bradley Racks AB
1771-A3B 12 Slot I/O Chassis AB
1771-A4B 16 Slot I/O Chassis AB
1771-AD I/O Chassis - 16 Slot AB
1771-AL PLC 2 I/O Adaptor Module AB
1771-ALX PLC5 Local I/O Adapter Module AB
1771-ASB Remote I/O Adapter Module AB
1771-ASC Remote I/O Adapter Module AB
1771-CE Power Supply Cable AB
1771-CFM Configurable Flowmeter Module AB
1771-CK I/O Chassis Power Cable AB
1771-CP1 I/O Chassis Cable AB
1771-CP2 I/O Chassis Cable AB
1771-CPI I/O Chassis Power Cable AB
1771-CR PLC-2 Processor Cable AB
1771-DA ASCII I/O AB
1771-DB Basic Module AB
1771-DC Real-Time Clock Module AB
1771-DCM 1771-DCM B Direct Communication Module AB
1771-DS Digital Input Module AB
1771-DW Digital Input Module AB
1771-E1C Analog Input Expander AB
1771-ES Servo Encoder Feedback Expander Module AB
1771-HM3A IMC-123 64 KW CMOS Memory Module AB

1771-HS3A IMC-123 IMC-123 3-Axis Servo AB
1771-IA Digital Input Module AB
1771-IA2 AC/DC Input Module AB
1771-IAD Digital Input Module AB
1771-IAN Digital Input Module AB
1771-IB Digital Input Module AB
1771-IBD Digital Input Module AB

The use of the product: