Product Details:
|
|
Place of Origin: | USA |
---|---|
Brand Name: | Allen Bradley Modules |
Certification: | CO.CQ |
Model Number: | 2711-B5A8X |
Payment & Shipping Terms:
|
|
Minimum Order Quantity: | 1 |
Price: | inquiry |
Packaging Details: | new and original with factory sealed |
Delivery Time: | today |
Payment Terms: | T/T |
Supply Ability: | 10 pieces a day |
Detail Information |
|||
Manufacture Year: | 2016 | Control System: | Allen Bradley Modules |
---|---|---|---|
Application: | Nuclear Power Plant | Lead Time: | In Stock |
Description: | 2707-L40P2 2707 L40P2 AB 2707L40P2 SERB REV A DATA LOGGER | Weight: | 4lbs |
High Light: | allen bradley plc 5,controlnet bridge module |
Product Description
Allen Bradley Modules 2711-B5A8X 2711-B5A8X AB 2711 B5A8X PanelView
Product Description:
The Remote I/O communications module allows a SCANport product to look and act like a Remote I/O chassis when connected to a programmable controller. Data contained in the input/output image table is transferred between the programmable controller by the Remote I/O scanner, the same as with any Remote I/O chassis. You control the location of data transferred by setting the rack address and
starting group. You control the amount of data by setting the DIP switches on SW3. Important: Thecommunications module does not scale the data that is transferred. Consequently, all scaling of the data must be done in the controller. Refer to the user manual for your SCANport product for details on
device units. Important: The Remote I/O to SCANport conversion is asynchronous. Data sent to the adapter for transfer to the drive must be maintained until the drive has received data.DIP switches on SW3 determine how the data contained in the programmable controller I/O image table is used in the drive. Figure shows an I/O image table.
.
Related Product Recommendation:
1440-SPD02-01RB | 1441-PEN25-KIT-BAL | 1794-TB32 |
1440-TPR06-00RE | 1441-PEN25-MOD-2CH | 1794-TB3G |
1440-TPS02-01RB | 1441-PEN25-MOD-BAL | 1794-TB3S |
1440-TTC06-00RE | 1441-PEN25-MOD-BMP | 1794-TBN |
1440-TUN06-00RE | 1441-PEN25-MOD-FRF | 1794-TBNF |
1440-VAD02-01RA | 1441-PEN25-MOD-REC | 1794-VHSC |
1440-VDRP06-00RH | 1441-PEN25-MOD-RUCD | 193-ECPM3 |
1440-VDRS06-00RH | 1441-PEN25-NS | 2094-AM01 |
1440-VDRS06-06RH | 1441-PEN25-PSC-US | 2094-AM02-S |
1440-VLF02-01RA | 1441-PEN25-Z2-100 | 2094-BC01-M01-S |
1440-VSE02-01RA | 1442-DR-1150 | 2094-BM05 |
1441-DYN25-2C | 1442-DR-1190 | 2094-BMP5-S |
1441-DYN25-CAP | 1442-DR-1850 | 2098-DSD-020X |
1441-DYN25-CBL2CH | 1442-DR-1890 | 2098-DSD-HV100-SE |
1441-DYN25-CBLHS | 1442-DR-2550 | 2706-M1N1 |
1441-DYN25-CD | 1442-DR-2590 | 2706-P22R |
1441-DYN25-M4CH | 1442-DR-5050 | 2707-L40P2 |
1441-DYN25-MBAL | 1442-DR-5090 | 2711-B5A8X |
1441-DYN25-MBMP | 1442-DR-5850 | 2711-B6C1 |
1441-DYN25-MFRF | 1442-DR-5890 | 2711-B6C10 |
1441-DYN25-MREC | 1442-EC-1140A | 2711-K10C1 |
1441-DYN25-MRUC | 1442-EC-1140N | 2711-K10C15L1 |
1441-DYN25-PS | 1442-EC-1180A | 2711-K5A5 |
1441-DYN25-Z-2C | 1442-EC-1180N | 2711-T10C15 |
1441-PEN25-BAT | 1442-EC-1840A | 152H-C135XBD-50 |
1441-PEN25-HS | 1442-EC-1880A | 152H-C135XBD-50-8B |
80190-600-01-R | 1442-EC-2540A | 152H-C135XBD-50-8L |
Product's Character:
The name of the tag will reflect the name you assigned the earlier. The "C" sub-group contains the contents of the configuration assembly, which is not currently used in the 1203-CN1. The "O" subgroup contains one entry for each word of output data you configured, and the "I" sub-group contains one entry for each word of input data you configured. The "O" sub-group corresponds directly to output data for a PLC-5 described on page 5-2 of the 1203-CN1 user manual (i.e., for most common configurations, word 0 is the logic command, word 1 is the speed reference, words 2 and 3 are the first pair of data links, etc.). The "I" sub-group is similar to the input data for a PLC-5, except that it is shifted by two words (i.e., word 2 is the logic status, word 3 is the speed feedback, etc.). Words 0 and 1 of the "I" sub-group represent network status data sent by the 1203-CN1 but not processed directly by the ControlLogix processor. At this point, I/O between the ControlLogix processor and the 1203-CN1 should be configured and running, and the meaning of the various I/O words should be understood. If you need further assistance in configuring I/O, please contact technical support.
1772-LXP Mini PLC 2/16 Processor AB
1774-MA 4 K Memory Module AB
1774-SD Remote I/O Module AB
1774-SR Remote I/O Half Scanner Module AB
1774-TB2 Interface Module AB
1775-A3 PLC-3/10 PLC-3 Chassis AB
1775-KA Communication Adapter AB
1775-L4 Main Processor Module AB
1775-MS4 Error Correcting Memory 16K Ram AB
1775-P2 Power Supply AB
1775-P3 Multi-Output Power Supply AB
1775-SR5 I/O Scanner Communications Module AB
1777-CP Terminator AB
1784-CP13 2801–N8 Video Interface Cable AB
1784-KT/B ISA/EISA Communication Module AB
1784-KTX ISA Communication Module AB
1784-PCICS PCI Bus Messaging Module AB
1784-PKTX/A PCI Network Interface Card - Series A AB
1784-PKTX/B PCI Network Interface Card - Series B AB
1785-ENET/A 96204473 Ethernet Interface Module AB
1785-KA Communication Adapter Module AB
1785-KA3 DH PLC-2 INTFC Communication Adapter Module AB
1785-L11B /11 /11 Processor Module AB
1785-L20B/C /20 /20 Processor Module - Series C AB
1785-L20B/E /20 /20 Processor Module AB
1785-L30B/A PLC -5/30 PLC -5/30 Processor - Series A AB
1785-L30B/C PLC -5/30 PLC -5/30 Processor - Series C AB
1785-L30B/D PLC -5/30 PLC -5/30 Processor - Series D AB
NEW Lucent/Martek MAX TNT-SP-DC-H/PS2246 Power Supply 965 W, Hot-Swappable
NetApp/Network Appliance 201-00096 16GB PCIe Cache Card Pisces Accelerator
NEW Apex/Avocent ELC-00OM-01 ViewPoint Output Interface KVM Module/Card
NEW Avocent/Apex ELC-02UP ViewPoint User Interface Pod KVM Switch
NEW Avocent/Apex OutLook 180ES KVM Switch 1 : 8 Port 1U
NEW Avocent/Apex OutLook 180ES KVM Switch w/9 CO-0732 Cables, 1U 1:8 Port
Bird 50E 50W 400-1000 MHz Wattmeter Slug/Element 43+
Bird 100E 100W 400-1000 MHz Wattmeter Slug/Element 43+
Efratom FRS-C 10MHz Rubidium Atomic Oscillator Standard
Qty. 5: NEW SMC NZHI10DL-T01-T01-T01 1/8 SUP Vacuum Ejector, AMAT
Tektronix 485 Dual Trace 350 MHz Portable Oscilloscope
Bird 50A 50W 25-60 MHz Wattmeter Slug/Element for 43+
Terra Universal 1943-00 Adjust-A-Shelf Desiccator 3950 24" W x 18" D x 24" H
NEW Teledyne M6760-4 J-Band Wideband Spiral Antenna (5.5 to 15.5 GHz)
Magnaflux H-820 Particle Inspection System/Tester 6000 A (H-700) NDT
The use of the product:
1.CNC machinery metallurgy,
2.oil and gas,
3. petrochemical,
1.Avoid unplanned downtime
2.Provides the lowest Total Cost of Ownership (TCO)
3.provides integrated control, power, safety,
Our advantages:
1.We keep more than 10 thousands Transistors in warehouse, it could cut lead time of most items.
2.2000+ suppliers with us, we could help you to get any components which is difficult to get.
3.Risk-free guarantee, 60 days refund. If the item you purchase from our store are not of perfected quality, simply return them to us for replacement or refund.
1.Q:Does your goods are new and original ?
A: yes ,they are new and original
2.Q:How long warranty does Moore can provide ?
A: Moore can provide 1 year warranty !
3.Q:Does Moore test the products before shipping ?
A:Yse , we have professional technology staff to test the goods before
Send your Inquiry details in the Below, Click "Send" Now!
Email :sales@mooreplc.com
Q Q: 2851195450
Skype: miyazheng520
Mobile:86-18020776792 ( what's app )
Enter Your Message