Allen Bradley Modules 917-0050 917 0050 AB 9170050 WELDING MODULE

Allen Bradley Modules 917-0050 917 0050 AB 9170050 WELDING MODULE

Product Description:

Bulletin 1305 drive parameter data can be programmed and displayed using PLC’s, SLC’s or other logic controllers using an optional Bulletin 1203 Communication Module. The amount of information that can be transferred between the drive and controller is determined by the DIP switch settings on theCommunication Module. Table B.1 illustrates the dip switch settings for Bulletin 1203-GD1 (Remote I/O) communication modules. Dip switch settings for other communication modules will be similar. Refer
to the appropriate communication module user manual for details.Important: 1305 drives with firmware revisions FRN1.01 and FRN1.02 are not compatible with Bulletin 1203 Communication Modules. If connected, an error message will be indicated. The red fault status and amber SCANport status LED’s on the front of the module will flash simultaneously.

Related Product Recommendation:

Product's Character:

The Remote I/O communications module allows a SCANport product to look and act like a Remote I/O chassis when connected to a programmable controller. Data contained in the input/output image table is transferred between the programmable controller by the Remote I/O scanner, the same as with any Remote I/O chassis. You control the location of data transferred by setting the rack address and
starting group. You control the amount of data by setting the DIP switches on SW3. Important: Thecommunications module does not scale the data that is transferred. Consequently, all scaling of the data must be done in the controller. Refer to the user manual for your SCANport product for details on
device units. Important: The Remote I/O to SCANport conversion is asynchronous. Data sent to the adapter for transfer to the drive must be maintained until the drive has received data.DIP switches on SW3 determine how the data contained in the programmable controller I/O image table is used in the drive. Figure shows an I/O image table.

1771-OBN Digital Output Module AB
1771-OC Digital Output Module AB
1771-OD Digital Output Module AB
1771-OD16 Digital Output Module AB
1771-ODC Digital Output Module AB
1771-ODD Digital Output Module AB
1771-ODZ Digital Output Module AB
1771-OFE1 960578 Analog Output Module AB
1771-OFE2 Analog Output Module AB
1771-OFE3 Analog Output Module AB
1771-OG TTL Output Module AB
1771-OGD TTL Output Module AB
1771-OM Digital Output Module AB
1771-OMD AC Output Module AB
1771-ON Digital Output Module AB
1771-OP Digital Output Module AB
1771-OQ Digital Output Module AB
1771-OQ16 1771-OQ16 A Digital Output Module AB
1771-OR Digital Output Module AB
1771-OVN Digital Output Module AB
1771-OW Selectable Contact Module AB
1771-OW16 1771-0W16 B Digital Output Module AB
1771-OWN 1771-0W16 B Digital Output Module AB
1771-OWNA 1771-0W16 B Digital Output Module AB
1771-OX Output Module AB
1771-OYL Digital Output Module AB
1771-OZC Contact Output Module AB
1771-OZL Digital Output Module AB
1771-P10 Power Supply Module AB
1771-P2 Auxiliary Power Supply AB

CTI Cryogenics G060 Stainless 5 FT Braid Hose 8043074

CTI Cryogenics 8043075G120 10FT Stainless Steel Braid Hose 055-04 NTB 260 PSI

LEITZ WETZLAR MICROSCOPE AF KEYPAD CONTROLLER 301-305.562

NORDSON MAGNETRON 775130

STEC SEF-21 Mass Flow Controller Floline 1 LM

NT International 6500-T2-F02-H04-M-P2-U1 Integrated Flow Controller 6500

NT International 6500 Integrated Flow Controller 6500-T4-F03-H04-M-P2-U1

NT International 6500-T5-F03-H04-M-P2-U1 Integrated Flow Controller 6500

NT International 6500-T6-F03-H04-M-P2-U1 Integrated Flow Controller 6500

PRECISE SENSORS 3441-0006501C6WSE02L0002 0-65 PSIA

Aera FC-D985CT-BH Mass Flow Controller 200 SCCM HBr

Mykrolis IntelliFlow II Digital Flow Controller DSSAE100 2000 SCCM Ar

WHITMAN CONTROLS PRESSURE SWITCH J205G-25S-C52L-X

Tylan FC-2979MEP5 Mass Flow Controller 50 SCCM CH2F2

NEW Millipore FC-2952MEP5-T Mass Flow Controller 10 SLPM HE

The use of the product: