Allen Bradley Modules SP-151140 SP 151140 AB SP151140

Product Description

Allen Bradley Modules SP-151140 SP 151140 AB SP151140

Product Description:

Appendix B provides information about the Block Transfer messages supported by the Remote I/O communications module. In this appendix, you will read about the following: Block transfer status word.
Setting up data files for block transfer messages.Examples of block transfer messages. Block transfer

quick reference. Important: This appendix provides detailed examples of block transfer messages. For information about block transfer messages, also refer to Chapter 5.Chapter 1 provides an overview of the
Remote I/O communications module (1203-GD1 module, 1203-GK1 module, and 1336-GM1 board). In

this chapter, you will read about the following:Function of the module.Features of the module. Compatible SCANport products and programmable controllers. Parts and hardware of the module. Steps for setting up the module.Required tools and equipment.Description of the Remote I/O Communications Modules

The Remote I/O communications module is an optional interface designed to provide a direct, digital link between an AB programmable controller and any one AB SCANport product. A module is required for each product that you want to connect to Remote I/O. There are three types of

Remote I/O communications modules

Related Product Recommendation:

Product's Character:

For the requested packet interval, enter the number of milliseconds desired between each I/O message
between the ControlLogix processor and the 1203-CN1. The 1203-CN1 can handle a packet interval as
low as 5 milliseconds; therefore, make sure that this value is set to at least Click the "Finish" button to

complete the configuration of the I/O connection in RSLogix 5000. At this point, download your configuration to the ControlLogix processor, then exit RSLogix 5000. To actually schedule the I/O, you will need to start RSNetWorx for ControlNet. Once RSNetWorx starts, go online to the ControlNet network

containing the ControlLogix chassis and 1203-CN1 being configured. Turn on the "Enable Edits" check box, then save the network. This causes the I/O connection created in RSLogix 5000 to be scheduled in the ControlLogix processor. After a few seconds, the I/O LED on the ControlLogix processor and the

module LED on the 1203-CN1 should stop blinking and remain green. If they do not, it could indicate a number of I/O-related problems

• 1792D-CBFM base for: INPUT MODULE 8SINK/SOURCE 4CONNECTORS AB
• 1793-IB16 Digital Input Module AB
• 1793-IB16S Digital Input Module AB
• 1793-IB2XOB2P 24 VDC Combo Module AB
• 1793-IB2XOB2PS 24 VDC Combo Module AB
• 1793-IB4 Digital Input Module AB
• 1793-IB4S Digital Input Module AB
• 1793-IE2XOE1 Analog Combo Module AB
• 1793-IE2XOE1S Analog Combo Module AB
• 1793-IE4 Analog Input Module AB
• 1793-IE4S Analog Input Module AB
• 1793-IV16 Digital Input Module AB
• 1793-IV16S Digital Input Module AB
• 1793-OB16P Digital Output Module AB
• 1793-OB16PS Digital Output Module AB
• 1793-OB4P Digital Output Module AB
• 1793-OB4PS Digital Output Module AB
• 1793-OE2 Analog Output Module AB
• 1793-OE2S Analog Output Module AB
• 1793-OV16P Digital Output Module AB
• 1793-OV16PS Digital Output Module AB
• 1793-OW4 Relay Contact Output Module AB
• 1793-OW4S Relay Contact Output Module AB
• 1794-ACN15 ControlNet Adaptor AB
• 1794-ACN15K ControlNet Adaptor AB
• 1794-ACNR15 ControlNet Adaptor AB
• 1794-ACNR15XT ControlNet Adaptor AB
• 1794-ADN DeviceNet Adaptor AB
• 1794-ADNK DeviceNet Adaptor AB
• 1794-AENT Ethernet Adaptor AB
• 1794-AENTR Ethernet Adaptor AB
• 1794-AENTRXT Ethernet Adaptor AB
• 1794-APB Profibus DP Adaptor AB
• 1794-APBDPV1 Profibus DP V1 Adaptor AB
• 1794-ASB 96265871,960404877 Remote I/O Adaptor AB
• 1794-ASB2 Remote I/O Adaptor AB
• 1794-CE1 Extender Cable AB
• 1794-IA16 Digital Input Module AB
• 1794-IA8 Digital Input Module AB
• 1794-IA8I Digital Input Module AB
• EDWARDS LOWARA CENTRIFUGAL PUMP SV206N07TSP E26001031
• EDWARDS LOWARA CENTRIFUGAL PUMP SV206N07TSP.75KW 107390064-BOC01
• SMC E/P REGULATOR IT2031-N33
• SMC E/P REGULATOR IT2011-N32
• ENTEGRIS 972 PRESSURE REGULATOR FLARETEK 972-70204-72
• Tescom 44-2362-RM-050 Pressure Regulator Used
• NEW TESCOM HIGH PURITY PRESSURE REGULATOR 64-26V2TRL21 100PSIG *NEW*
• Tescom 64-3662KT428-006 Pressure Regulator
• Tescom 44-3212H283-003 Pressure Regulator Used
• Tescom 44-3260H283-003 Pressure Regulator Used
• Tescom 44-2861-A41-039 Pressure Regulator New
• VICTOR EXTRA HEAVY DUTY LINE REGULATOR L700E
• VICTOR REGULATOR L700E CONTROL SYSTEMS ST-34
• CRYDOM CPV120 PHASE CONTROL MODULE
• ACROMAG INTELLIPACK DUAL ALARM 822A-0200
• CRYDOM SOLID STATE RELAY D2410-10 10A
• CRYDOM SOLID STATE RELAY D2425 25A
• P&B SSRQ-240D20 QUAD 240V 20A SOLID STATE RELAY
• SIEMENS 1P 6ES7 214-1AD22-0XB0 6ES72141AD220XB0 6ES7 214-1AD22-0XBO
• CROUZET GA3-12D25Z SOLID STATE RELAY 3 PHASE 660V 25A
• Gloves high temp 2000 F
• AMAT P5000 CVD RF Match 0020-09357

The use of the product: