SCALANCE XB213-3 managed Layer 2 Industrial Ethernet switch with copper access ports, multimode ST/BFOC fiber uplinks and default EtherNet/IP configuration.
13 electrical RJ45 ports at 10/100 Mbps plus 3 optical 100Base-FX multimode ST/BFOC ports.
Official operating instructions list multimode 50/125 µm or 62.5/125 µm glass fiber cable up to 5 km under the stated attenuation limits.
One RJ11 serial console plus LEDs for power, port status and data traffic; web browser and CLI management are available for the family.
24 VDC rated supply, 19.2–28.8 VDC SELV range, implemented redundantly; 410 mA current consumption and 9.8 W effective power loss.
0 to +60 °C operation up to 2000 m; -40 to +70 °C storage and transport; ≤95% relative humidity without condensation.
IP20 polycarbonate enclosure, 120 × 117 × 109 mm, approximately 0.5 kg, designed for DIN-rail mounting in a control cabinet.
| Product description | Managed Layer 2 Industrial Ethernet switch in the Siemens SCALANCE XB-200 family. |
|---|---|
| Copper interfaces | 13 RJ45 jacks, half/full duplex with MDI-X, 10 or 100 Mbps. |
| Optical interfaces | 3 ST/BFOC sockets, 100Base-FX full duplex, multimode glass fiber. |
| Supply and diagnostics | Redundant 24 VDC terminal-block supply, diagnostic LEDs and one RJ11 serial console. |
| Protocol profile | PROFINET and EtherNet/IP support within the XB-200 family; this order number is supplied with EtherNet/IP as default. |
| Security / installation | IEC 62443-4-2 certified product description; IP20; DIN-rail mounting. |
The uploaded team photo is retained once on this product page.
The uploaded company video is retained once on this product page.
Email: miya@mvme.cn
WhatsApp: +86 180 2077 6792
Include with your inquiry: full MLFB, device label and port photos, firmware, required protocol, quantity, destination and required date.
Thirteen. The exact XB213-3 model also provides three 100 Mbps multimode ST/BFOC optical ports.
The official XB213-3 operating instructions specify 0 to +60 °C during operation up to 2000 m.
Not automatically. Connector type, fiber mode, factory-default protocol and full order number must all be checked.