Allen Bradley Modules 1756-IF4FXOF2F 1756IF4FXOF2F AB 1756 IF4FXOF2F PLC Module New spot folding

Product Description

Allen Bradley Modules 1756-IF4FXOF2F 1756IF4FXOF2F AB 1756 IF4FXOF2F PLC Module New spot folding

Product Description:

Bulletin 1305 drive parameter data can be programmed and displayed using PLC’s, SLC’s or other logic controllers using an optional Bulletin 1203 Communication Module. The amount of information that can be transferred between the drive and controller is determined by the DIP switch settings on theCommunication Module. Table B.1 illustrates the dip switch settings for Bulletin 1203-GD1 (Remote I/O) communication modules. Dip switch settings for other communication modules will be similar. Refer
to the appropriate communication module user manual for details.Important: 1305 drives with firmware revisions FRN1.01 and FRN1.02 are not compatible with Bulletin 1203 Communication Modules. If connected, an error message will be indicated. The red fault status and amber SCANport status LED’s on the front of the module will flash simultaneously.

Related Product Recommendation:

Product's Character:

Manual, gives an overall description of the Bulletin 1305 Adjustable Frequency AC Drive (herein called “the drive”) and provides a listing of key drive options. Additionally, this chapter provides information on receiving and handling the drive. MANUAL OBJECTIVES The purpose of this manual is to provide
the user with the necessary information to install, program, start up and maintain the Bulletin 1305 drive. To assure successful installation and operation, the material presented must be thoroughly read and
understood before proceeding. Particular attention must be directed to the ATTENTION and Important statements contained within. Chapter 2 provides instructions on how to mount and wire the drive. It also describes how to operate the drive without a Human Interface Module. Read the Motor Cable Length
section on pages 2-13 – 2-16, and the contact closure inputs information in the Control Terminal Block descriptions on pages 2-19 – 2-21. Chapter 3 defines the display and control panel keys on the optional Human Interface Module. A flowchart is provided to guide the user through the key strokes of the various
menu levels.

1771-IG TTL Input Module AB
1771-IGD TTL Input Module AB
1771-IH Digital Input Module AB
1771-IJ Encoder/Counter Module AB
1771-IK Encoder/Counter Module AB
1771-IL Analog Input Module AB
1771-IM Digital Input Module AB
1771-IN Digital Input Module AB
1771-IND Digital Input Module AB
1771-IQ Digital Input Module AB
1771-IQ16 Digital Input Module AB
1771-IQC Digital Input Module AB
1771-IR Analog Input Module AB
1771-IS Digital Input Module AB

1771-IT Digital Input Module AB
1771-IV Digital Input Module AB
1771-IVN Digital Input Module AB
1771-IXE Analog Input Module AB
1771-IXHR Analog Input Module AB
1771-KA2 Data Highway Communications Adaptor AB
1771-KG Data Highway Communications Module AB
1771-NB4S Analog Combination Module AB
1771-NB4T Analog Combination Module AB
1771-NBRC Analog Combination Module AB
1771-NBSC Analog Combination Module AB
1771-NBTC Analog Combination Module AB
1771-NBV1 Analog Combination Module AB
1771-NBVC Analog Combination Module AB
1771-NC6 96808801 Analog Cable AB
1771-NIS Analog Input Module AB
1771-NIV Analog Input Module AB
1771-NIV1 Analog Input Module AB
1771-NIVR Analog Input Module AB
1771-NIVT Analog Input Module AB

The use of the product: