Allen Bradley Modules 1756-OB16IS 1756OB16IS AB 1756 OB16IS A OUTPUT MODULE Highest version

Product Description

Allen Bradley Modules 1756-OB16IS 1756OB16IS AB 1756 OB16IS A OUTPUT MODULE Highest version

Product Description:

The Remote I/O communications module allows a SCANport product to look and act like a Remote I/O chassis when connected to a programmable controller. Data contained in the input/output image table is transferred between the programmable controller by the Remote I/O scanner, the same as with any Remote I/O chassis. You control the location of data transferred by setting the rack address and
starting group. You control the amount of data by setting the DIP switches on SW3. Important: Thecommunications module does not scale the data that is transferred. Consequently, all scaling of the data must be done in the controller. Refer to the user manual for your SCANport product for details on
device units. Important: The Remote I/O to SCANport conversion is asynchronous. Data sent to the adapter for transfer to the drive must be maintained until the drive has received data.DIP switches on SW3 determine how the data contained in the programmable controller I/O image table is used in the drive. Figure shows an I/O image table.

Related Product Recommendation:

Product's Character:

For the requested packet interval, enter the number of milliseconds desired between each I/O message
between the ControlLogix processor and the 1203-CN1. The 1203-CN1 can handle a packet interval as
low as 5 milliseconds; therefore, make sure that this value is set to at least Click the "Finish" button to
complete the configuration of the I/O connection in RSLogix 5000. At this point, download your configuration to the ControlLogix processor, then exit RSLogix 5000. To actually schedule the I/O, you will need to start RSNetWorx for ControlNet. Once RSNetWorx starts, go online to the ControlNet network
containing the ControlLogix chassis and 1203-CN1 being configured. Turn on the "Enable Edits" check box, then save the network. This causes the I/O connection created in RSLogix 5000 to be scheduled in the ControlLogix processor. After a few seconds, the I/O LED on the ControlLogix processor and the module LED on the 1203-CN1 should stop blinking and remain green. If they do not, it could indicate a number of I/O-related problems

1769-OB16 Digital Output Module Allen-Bradley
1769-OF2 Analog Current/ Voltage Output Allen-Bradley
1770-P1 Power Supply Allen-Bradley
1770-SC Station Connector Allen-Bradley
1770XYC AB PLC 5 Battery Allen-Bradley
1771-0B Digital Output Module Allen-Bradley
1771-A2B Allen Bradley Racks Allen-Bradley
1771-A3B 12 Slot I/O Chassis Allen-Bradley
1771-A4B 16 Slot I/O Chassis Allen-Bradley
1771-AD I/O Chassis - 16 Slot Allen-Bradley
1771-AL PLC 2 I/O Adaptor Module Allen-Bradley
1771-ALX PLC5 Local I/O Adapter Module Allen-Bradley
1771-ASB Remote I/O Adapter Module Allen-Bradley
1771-ASC Remote I/O Adapter Module Allen-Bradley
1771-CE Power Supply Cable Allen-Bradley
1771-CFM Configurable Flowmeter Module Allen-Bradley
1771-CK I/O Chassis Power Cable Allen-Bradley
1771-CP1 I/O Chassis Cable Allen-Bradley
1771-CP2 I/O Chassis Cable Allen-Bradley
1771-CPI I/O Chassis Power Cable Allen-Bradley
1771-CR PLC-2 Processor Cable Allen-Bradley
1771-DA ASCII I/O Allen-Bradley
1771-DB Basic Module Allen-Bradley
1771-DC Real-Time Clock Module Allen-Bradley
1771-DCM 1771-DCM B Direct Communication Module Allen-Bradley
1771-DS Digital Input Module Allen-Bradley
1771-DW Digital Input Module Allen-Bradley
1771-E1C Analog Input Expander Allen-Bradley
1771-ES Servo Encoder Feedback Expander Module Allen-Bradley
1771-HM3A IMC-123 64 KW CMOS Memory Module Allen-Bradley

1771-HS3A IMC-123 IMC-123 3-Axis Servo Allen-Bradley
1771-IA Digital Input Module Allen-Bradley
1771-IA2 AC/DC Input Module Allen-Bradley
1771-IAD Digital Input Module Allen-Bradley
1771-IAN Digital Input Module Allen-Bradley
1771-IB Digital Input Module Allen-Bradley
1771-IBD Digital Input Module Allen-Bradley

The use of the product: